Hardi Commander section control with Trimble

[Romeogolf]

Good evening,

I have a Hardi Commander 3200i spec trailed sprayer with 28m booms and 9 boom sections. I run a Trimble FM750 with autosteer on RTX and would like to gain auto section control by making them talk to each other. I have steering, auto boom height and rate, so auto section control seems to be the obvious next step in efficiency.

Save from going to the dealer who doesn’t seem to own a wealth of knowledge on the subject, does anyone have any advice on how to approach this?

 

[Bomber101]

Good evening,

I have a Hardi Commander 3200i spec trailed sprayer with 28m booms and 9 boom sections. I run a Trimble FM750 with autosteer on RTX and would like to gain auto section control by making them talk to each other. I have steering, auto boom height and rate, so auto section control seems to be the obvious next step in efficiency.

Save from going to the dealer who doesn’t seem to own a wealth of knowledge on the subject, does anyone have any advice on how to approach this?

What box do you have?

 

[Romeogolf]

HC6500 box, the one with a screen etc and joystick...

 

[Bomber101]

HC6500 box, the one with a screen etc and joystick...

Used to have a 5500 and direct connected as a slave to a Trimble fmx. Not sure about the 6500.

 

[manttys]

Good evening,

I have a Hardi Commander 3200i spec trailed sprayer with 28m booms and 9 boom sections. I run a Trimble FM750 with autosteer on RTX and would like to gain auto section control by making them talk to each other. I have steering, auto boom height and rate, so auto section control seems to be the obvious next step in efficiency.

Save from going to the dealer who doesn’t seem to own a wealth of knowledge on the subject, does anyone have any advice on how to approach this?

 

[Black_Sheep]

Good evening,

I have a Hardi Commander 3200i spec trailed sprayer with 28m booms and 9 boom sections. I run a Trimble FM750 with autosteer on RTX and would like to gain auto section control by making them talk to each other. I have steering, auto boom height and rate, so auto section control seems to be the obvious next step in efficiency.

Save from going to the dealer who doesn’t seem to own a wealth of knowledge on the subject, does anyone have any advice on how to approach this?

Speak to Vantage E & W. They are the Trimble main dealer/re-seller and have extensive knowledge of auto section control for a wide range of sprayers. Tel: 01480 861824