Heavy duty loader bucket

[Party Pete]

Hi , has anyone got any ideas on who makes a good solid loader bucket . I have a quickie at the moment but could do with a heavier duty one . I seem to be at the current one with the welder more than I would like …

 

[jd6420s]

My Albutt bucket will outlive me.

 

[Haytime]

Murray Machinery, without a shadow of a doubt!

 

[startinghandle]

Hang on a minute... I've repaired buckets in the past and they don't need welding again

 

[Greythundercloudys]

I got one of ebay from down in Wales, very good price and strong made, just a small firm.

 

[down n'dirty]

Could be Evans and Reid-have a bucket 24 years old, only wearing edge replaced!

 

[Lazy Eric]

Albutt rehandling buckets are very long lasting. We’ve 2 from 2006, used every day had new wearing edges changed 2 times but they will have done some miles. Out lived 3 manitous

 

[gpcwm]

Could be Evans and Reid-have a bucket 24 years old, only wearing edge replaced!

We've got a grab of their's. 20 years old and been on 4 different loader tractors.
Bucket wise we have a cherry xform very strong

 

[Party Pete]

Hang on a minute... I've repaired buckets in the past and they don't need welding again

You must be really clever

 

[startinghandle]

You must be really clever

Not really

 

[BredRedHfd]

Hi , has anyone got any ideas on who makes a good solid loader bucket . I have a quickie at the moment but could do with a heavier duty one . I seem to be at the current one with the welder more than I would like …

Eastern attachments Xform

 

[wr.]

Could be Evans and Reid-have a bucket 24 years old, only wearing edge replaced!

I bought an Evans & Reid 7' bucket in 1997 for £400. Replaced it for a 8' three years ago and sold the 22 year old one for £400. I'd replaced the wear strip three times and always washed out after use and it was still sound.
I had a 6' silage grab from them last week. Very strong and British built.