Isobus problem (no implements loaded)

[robin banks]

Had a problem with my isobus terminal for my baler a new Holland br6090. Got it repaired. It apparently had a faulty component which has now been upgraded.
Baler is now connected and it's saying on screen 'isobus virtual terminal (no implements loaded)'
Any idea how do you load an implement or is their any settings I should do

 

[Pheasant Surprise]

Implement “mask” is loaded automatically on the very first connect and then remains in the memory of the VT, so they don’t need to be downloaded each time you hitch up.

Usually if there are handshake issues, you need to make sure you delete/wipe the previous mask (implement interface) from your terminal. It should show up in the connected implement history.

Once deleted, shut the tractor off completely before attempting to connect the baler up to the ISObus socket from scratch.

 

[robin banks]

Here is pictures of screen. Not sure how to delete the mask. Have found one file and I deleted it and made no difference. It's an intelliview 2 if that makes any difference.
.if I bought an intelliview 3 would that solve the problem.

 

[Pheasant Surprise]

Was it working 100% correctly with the same baler before the terminal repair?

After you connect the baler and power up the tractor and screen do you see any other messages on the terminal?

Finally have you left it for a while, 10 to 20 minutes with the baler connected to the tractor and the tractor left running (or the ignition left on), to see what happens?

 

[robin banks]

Was working perfectly before repair. Disconnected it one day. Then 3 days later connected it up and screen was dead. Sent it for repair. Guy said it had a component that failed and had been upgraded and had a different screen in with same problem so had ordered some spare parts. He didn't disclose what part had been faulty.
Got it back yesterday plugged it in today screen turned on but VT screen has that message.
No other faults. I probably had the screen plugged in for at least 20 mins trying to find settings that may make it recognise the baler.

 

[Pheasant Surprise]

OK in that case you could be chasing your tail. It sounds very much like the screen still has some preexisting fault.

I would have expected the repairer to be able to tell me exactly what was component faulty and what they had repaired. It could actually be the “repair” causing your issue.

I don’t suppose you have any other ISObus implements you could test it with?

 

[topcat2006]

Have you checked all the fuses on the loom,?

 

[robin banks]

Checked all fuses and all fine. Could get an intelliview 4 would there be any reason my baler wouldn't work with it

 

[topcat2006]

As long as they are both current ISOBUS compliant it should be ok - but sometimes it's not that simple......

You can go onto the AEF website and click on the AEF database which will then tell you if the baler and intelliview 4 will work together, however that's assuming that they have been both AEF tested and both physical units are running the same version of software that was AEF tested.

 

[Kostas]

Guys i need your help. Just bought a brand new krone comprima plus cv150 xc. First time in the filed, and i baled 3 bales. I went down to make some adjustments to the net system so i shut off the tractor. Suddenly when i power on the tractor the baler couldnt connect to the tractor via the isobus cable. Baler does not found anywhere. I tried everything. I checked all the electrics safeties and is all good. The tractor is a john deere 6250. Someone help me pls cause dealer cant. Brand new baler with 3 bales
Thank you