JCB mudguards

[Matt77]

Think it's been asked before many years ago so I'll ask again, are there any copy parts for these, got a 535-60 which I'd like to replace at least one if not two, not coming up with much on Google

 

[Bob lincs]

Ring Gary at A Downing agricultural Engineers ( 01945 411888 ) he gets me mine . Genuine but a good price .

 

[john432]

Have you been on JCB parts web site, to get the correct part no ,then Google

 

[Matt77]

Yes I put the part number in, most up over £80 delivered, maybe that's the best it gets but a chap who worked on them said if you look hard enough you'll find them under £50, didn't ask him where because I didn't think they would be hard to find, thought I'd ask on here because it's usually got the best (and worst) answer's!

 

[keenanfeeder]

Think it's been asked before many years ago so I'll ask again, are there any copy parts for these, got a 535-60 which I'd like to replace at least one if not two, not coming up with much on Google

If its a newish machine, see if you can get them under warranty, there has been a lot of trouble with the new ones failing/splitting

 

[Matt77]

If its a newish machine, see if you can get them under warranty, there has been a lot of trouble with the new ones failing/splitting

Sadly not, 2015 machine

 

[Bloders]

can you get them from Kramp?
I got some for our tractor from there. Loads of choice.

 

[Matt77]

I’ll have a look, no idea why I didn’t think of that

 

[Matt77]

can you get them from Kramp?
I got some for our tractor from there. Loads of choice.

There’s nothing obvious on there, would need a measure up and it would probably look out of place whatever I picked, few on there at £70ish though

 

[fermerboy]

We have a loadall 526/56 and the black mudguards are in various states of disrepair, the one before ended up the same way and despite much searching on the net I really stuggled to find a cheaper option.
Lorry mudguards are available from a HGV dealer in many sizes and are cheap to buy but they don't look right to my thinking.

 

[Matt77]

I now can’t see my machine on the JCB parts website, no 536-60 on the fenders drop down but I think I want a 400/D5247 as a front right??

 

[Sparkplug]

Had 4 a few weeks ago including bolts, new spacers needed (like a rubber insert) - JCB nearly £1,000 - spurious £300 - only used for tidying up a machine before going to the auction - adequate but not sure how long they would last for end users. PM for more details.

 

[Longpod]

Try these from eBay

JCB PARTS "SECONDS" FENDER (400/D5247) LOADALL | eBay

This is a fender (400/D5247 ) to fit various JCB models. you will need to check suitability by providing us with your machine serial number so we can check that we are providing you with the correct part.

www.ebay.co.uk

They do “seconds”, so cheaper! Bought a mud guard from them for our loadall. Arrived quickly and seems to be fine...

 

[Matt77]

Found those, going to send serial number to check fit.

 

[Longpod]

For our 536-60, after submitting our serial number, they came back with these codes.

R/H rear 400/d5247
L/H rear 400/d5365
R/H front 332/c7715
L/H front 400/d7827

they had all in stock, some as seconds and some full price, but still cheaper than main dealer.

 

[Fendt820]

Have you tried Interpart. Get some Jcb parts through them. Normally half the price of dealer

 

[Badshot]

There's some on eBay, but still about £80 each.
Tried Haynes? You might be surprised.

 

[Matt77]

For our 536-60, after submitting our serial number, they came back with these codes.

R/H rear 400/d5247
L/H rear 400/d5365
R/H front 332/c7715
L/H front 400/d7827

they had all in stock, some as seconds and some full price, but still cheaper than main dealer.

Thanks

 

[Matt77]

Sorted thanks, £50 each, in post now.

 

[Richy12]

Where did you end up buying from?

After 4 for our Nov 2004 530-70. Any other places worth looking for this age before I delve deep into the Internet?