JD 6130R running 710/70R38's.

[Bob6130]

 

[John Deere 8530]

Looks good on the big tyres, shouldn’t think they need much pressure in to carry the weight

 

[Bob6130]

Think they are sitting at 8 PSI just now.

 

[brentnz]

That’s got to be one of the long wheelbase 4cyl tractors? The short wheelbase 6130r wouldn’t have enough clearance around the fuel tank

 

[Boo-Boo]

That’s got to be one of the long wheelbase 4cyl tractors? The short wheelbase 6130r wouldn’t have enough clearance around the fuel tank

Are 130r not all the same wheelbase

 

[damo810]

Are 130r not all the same wheelbase

They are, there is a 135 or 140r that is a 6cyl wb with 4 cyl engine. The new 6R 4cyl have the option of 650/65/38 from factory and it makes them a big tractor, didn’t think 710’s would fit on an older model

 

[Galcam]

Bob6130 have u a pic of side view showing clearance around mudguard etc?

 

[Gerbert]

They are, there is a 135 or 140r that is a 6cyl wb with 4 cyl engine. The new 6R 4cyl have the option of 650/65/38 from factory and it makes them a big tractor, didn’t think 710’s would fit on an older model

No their not. First gen r series biggest 4 cilinder was a 6125r, 6130r was a 6 cilinder frame with 4 cilinder engine. Never seen one in the flesh though.

 

[Gerbert]

I have posted a photo of a 6130r on 540/65r30 and 900/50r42. Needed the fueltank a bit altered though.

 

[6r 185]

They are, there is a 135 or 140r that is a 6cyl wb with 4 cyl engine. The new 6R 4cyl have the option of 650/65/38 from factory and it makes them a big tractor, didn’t think 710’s would fit on an older model

Can only have 650/65/38s if you don’t have a load on them, biggest option with loader is 600/65/38s or 650/60/38s but they only have the same rolling radius as the 600s!

 

[daveydiesel1]

What is the point of this thread

 

[Bob6130]

Bob6130 have u a pic of side view showing clearance around mudguard etc?

Can take a close up tomorrow to let you see the distance between the tank and the tyre. Think its about half a

n inch, and that is with part worn tyres

.

 

[Bob6130]

What is the point of this thread

just letting people know that you can fit 710/70R38 tyres on a JD 6130R.

 

[Gerbert]

I have posted a photo of a 6130r on 540/65r30 and 900/50r42. Needed the fueltank a bit altered though.

 

[Jd Everytime]

Now that's porn!!!

 

[kiwi pom]

How much extra do you pay for them and how much extra money do they make you?

 

[Finn farmer]

How much extra do you pay for them and how much extra money do they make you?

Good compromise if you don't want to have dual wheels. They cost a lot so definitely not for fun. Dad's friends runs 1050's on back and 710's on front of his Valtra. Still a lot narrower than dual 520's on rear. In Trelleborg guise they cost about 40k€ if bought from a tire seller. A lot less if ordered with them from the factory.

Narrow roads, hired workers and peat fields are the reason for him. Our roads are wide enough so we can run duals.

 

[Bob6130]

Bob6130 have u a pic of side view showing clearance around mudguard etc?

 

[paul&mandy]

Can see a stone going through that tank... Far too close.

 

[Lakesdigger]

Do you wear them half down on another tractor before you dare put them on the 6130?