JD 6210R upgrade to GreenStar ready

[JulienS]

Hi, does anyone knows which wiring harness do I need to make my MY14 JD 6210R GreenStar ready? We have a non-touch GS3 command center but it's not clear which harness do we need to connect to an ATU 300 and a receiver. Any hint/help much appreciated. Thanks.

 

[L P]

Might be better value to buy a second hand 1800 or 2600 screen with activation than to try and make your atu work through command centre. It would then be the standard atu loom.

 

[JulienS]

Indeed it might, I did that on an older 6930 tractor but as I got a GS3 autotrac activation at a good price which I could install on the GS3 command center, I'm really looking on options to upgrade existing wiring on the 6R as I might use the ISO connection too which atm it doesn't exist.

 

[L P]

Indeed it might, I did that on an older 6930 tractor but as I got a GS3 autotrac activation at a good price which I could install on the GS3 command center, I'm really looking on options to upgrade existing wiring on the 6R as I might use the ISO connection too which atm it doesn't exist.

Sorry, can't help you there, 2630 would do gs3, once the activation is on the command centre I don't believe its transferable, so if you sell the tractor the activation is gone. You can get a loom with isobus to go direct onto the remote screens, I might have one, will look and let you know the part number. You might find the loom you want on JD parts finder or speak to local ams tech.