JS130

[at the edge]

The old JS is getting ready for new boots, does anyone know the cheapest place for the full works... chains, sprockets, top rollers please.
Someone said they are the same as Hitachi? but don't know about that?

 

[Lincs Lass]

Might be cheaper to find a scrapper and get everything of it ,,United parts here in Lincolnshire get loads of cab fire damage and strip them

 

[pellow]

I thought they were the same as Kobelco

 

[ILovebaling]

Got my Hitachi chains, sprockets, top rollers and bolts off MST, there is one based at Birtley near Durham. Wasn't as dear as I expected.

 

[Hesston4860s]

Originally they where built by Sumitomo and painted badged as JCB

 

[Petebog]

Steve woods I used, have had 2 sets with them now, best price, was told they good quality. Lasting well so far

 

[nick...]

Midland steel traders will sort you
Nick...

 

[H200GT]

MST here to

 

[wuddy]

MST we done our komatsu PC75 a few years ago!

 

[Bob1234]

Replaced the chains & sprockets on my JS130 in November. I think it was £2000 including new bolts. From local supplier

 

[at the edge]

Best so far is £2200 plus haulage, tried all the folk you guys kindly recommended. What location are you please Bob1234?

 

[Thomas5060]

Have you tried your local JCB dealer? Probably a rip off but they could surprise you. When we put tracks on our EX30 in 2016 the Hitachi dealer came in around £150 per track cheaper than anyone else. Maybe worth a try

 

[H200GT]

If you don't want new, try a breaker, they may have a fire damaged machine in with decent tracks - Warwick Ward be a good bet.

 

[whiddy]

www.itstrac.co.uk/
Did a good deal with me, part exed my tracks for new chains and same spec pads. new sprockets and fitting was about £2250.00

 

[H200GT]

www.itstrac.co.uk/
Did a good deal with me, part exed my tracks for new chains and same spec pads. new sprockets and fitting was about £2250.00

Not sure if they are still trading, administartors appointed earlier this month.

Shame, only traded with them a couple times, but could not fault them at all.

https://www.thegazette.co.uk/notice/3488407

 

[at the edge]

Tried JCB, promised to email quote through but nothing yet surprise.. I will try itstrac tomorrow, they sound promising.

Got a price for full set of s/h £2250???? Admittedly with pads but really??

 

[shumungus]

Try KD plant https://www.kdplant.com/
Speak to Jay or David they know the job inside out and should be able to do a competitive price for everything delivered to you.

 

[Zetor]

How many hours has it done? If it’s on it’s original berco chains then I assume you’ve done roughly around 6000 hrs, if so then I would recommend replacing the idlers.

 

[at the edge]

Try KD plant https://www.kdplant.com/
Speak to Jay or David they know the job inside out and should be able to do a competitive price for everything delivered to you.

They're looking good.. Thumbs up sign (if I knew how to do it!)

 

[at the edge]

How many hours has it done? If it’s on it’s original berco chains then I assume you’ve done roughly around 6000 hrs, if so then I would recommend replacing the idlers.

Its one Ive just picked up to replace a Robex 130-3, It must be on original chains only 4000 on her, but looks like she's been in sand or road grit as the cabs all pocked and the slides are well out although the chains aren't through at all? A lot of of our ground is pretty wet with big stones in the and rocks in the subsoil which pops a worn chain off for fun, but not so fun getting her wound back on in all the gutters!