Keeping concrete clean in winter

[michael N123]

Slurry tanker a decent splash plate water and a crawler gear if you reverse the tractor It works better

 

[Bojangles]

Anyone know of companies that offer a demo bucket brush out in the north east? Northumberland

 

[belac]

Bucket brush without a shadow of a doubt, bought one 2 year ago and it has to be one of the best things I’ve ever bought.

+1

 

[Sheep92]

Big square bale of coffin bale on the loader does a good job brushing, use a bucket of it's very dirty though

 

[DieselRob]

Anyone know of companies that offer a demo bucket brush out in the north east? Northumberland

Get a demo once a year before farm assurance inspection?

I bought a Bainbridge last year to go on an existing bucket, should’ve had 1 years ago

 

[Fendt516profi]

@Northeastfarmer https://www.ebay.co.uk/itm/Slewtic-76-Loader-Bucket-With-Hydraulic-Brush-/303852228766

 

[Bojangles]

@Northeastfarmer https://www.ebay.co.uk/itm/Slewtic-76-Loader-Bucket-With-Hydraulic-Brush-/303852228766

Was just looking at that earlier. I have a bucket I can put one on but it seems that they are a better buy second hand with a bucket than without

 

[Fendt516profi]

Was just looking at that earlier. I have a bucket I can put one on but it seems that they are a better buy second hand with a bucket than without

Better with one with its own bucket. Like having a ifor with wheels underneath so you can take box off to use the flat.

 

[Northeastfarmer]

Get a demo once a year before farm assurance inspection?

I bought a Bainbridge last year to go on an existing bucket, should’ve had 1 years ago

They look good quality the bainbridge ones

 

[coniser]

Farm where l used to work at bought a bainbridge one it made a good job

 

[hubbahubba]

Just wondering what brushes people like best? I've heard some of the pumps cant take the hydraulic pressure off a telehandler and they can blow up....? Is a 1cm bucket big enough or would i be better just to buy brush and weld lugs to pin to my 2cm albutt? Brush about £1500 and small 1cube bucket around £900.

 

[Hard Graft]

a bucket on the brush is not too hard to put on but a long deep bucket is brilliant along with a its own bucket but a 1m3 is a waste of time and you should be able to get a 1.5m3 for not much more

so put it on your 2m3 for the short term

 

[hubbahubba]

Just wondering what brushes people like best? I've heard some of the pumps cant take the hydraulic pressure off a telehandler and they can blow up....? Is a 1m3 bucket big enough or would i be better just to buy brush and weld lugs to pin to my 2m3 albutt? Brush about £1500 and small 1cube bucket around £900.