KV spreading charts

[Badshot]

Answer from KV.

There hasn't been work done on this machine with prills.
Tray test is the only way.


However, I've run urea through both machines and it's come back to the same letter, so fir now it's going to be done on J, as per the lesser model.

Pretty poor IMO on KV part.
Bit like Ferrari selling a car and saying it might have 500bhp.
Flagship models should be where the work starts, and filter down.

 

[KB6930]

While on the spreader subject no matter what I try I always end up under dosing a bit round the edge(slightly yellow) it's throwing it plenty far enough as there's always prills through the fence .

It's not bad but just annoying

I'm wondering if I shut the revs back it might bring the stuff it's throwing too far back into play but the inside spread pattern will be affected so ins and outs be worse?

 

[Badshot]

I use some liquid to top the outside up.
I use liquid for some of the applications anyway so mine is good.
I went to some liquid for that very reason though.

 

[KB6930]

I've been looking at the fields all day and I'm starting to think it's more if I'm lying at a funny angle and it's not making it the full 12m as most of them are fine it's just the odd bits here and there

 

[JCfarmer]

They seem to have 1001 or more different fertiliser types.....but rarely the 5-6 main fertilisers used for 80% of product spread in this country.

I couldn't agree more, I use Origin mainly , urea and urea sulphur and they are not on the app!