Laser Level

Pinnfield

Member
Livestock Farmer
Even if you brought a second hand better quality one I would recommend you get it calabraited before you try using it, cost is peanuts against time putting things right, you can hire one for a week for very little.
 
Location
Suffolk
Will be laying a stone base for a new shed soon, rather than hire a laser level thought I might buy one, loads on ebay for £50.
Any good? Any recommendations? Thanks.
I have a 'Cowley level'. The only thing this fab piece of kit has against it is that it is a two man operation. One to look through the level itself and the other to hold the staff. It is as accurate as a laser in every way except over distances. If you are skilled you will overcome this. Back-sighting is important.
Water levels are ok but not as quick, but they will go round corners! My Cowley is accurate to 1/16" in 25'.
You can use a standard 'Brickies' level, using a long straight edge. Just reverse the level each run and you will be within 1/2". I've done 60' in this way.....I do love my Cowley though.
Ah, just looked on ebay. Yes you can get one for £10 but it's missing the tripod and spike that activates the pendulum and of course the staff but once you have these you are ok. There is still a co that re-calibrates the machine and this isn't too costly and providing you dont' treat it like a scraper tractor you'll have twenty years of accurate operating from this and after good re-sale value.
I see they have become collectable! https://www.ebay.co.uk/itm/233829590883?hash=item3671546763:g:A1AAAOSw5wRf4Gl

SS
 
Last edited:
Don’t waste your money on a cheap one from eBay. It’ll only end up costing you a fortune in wasted time and errors.

@Laser Levels Online is where you need to go. Discount for TFF members too.

Plenty of threads on here about them too.

Yes, like the others have commented, I too would be sceptical of the quality / accuracy of a product at that price.

Typically trade lasers retail for around the £500 + price point depending on the spec and features.

Lasers often end up on the auction sites when they are found to not be accurate or cannot be repaired.

That is not to say you cannot get a good second-hand laser, you just need to be careful. Sometimes you are lucky and get one that has been bought and used sparingly for a self-build and then sold on when the project was completed. However, they tend to hold their value pretty well if they obviously haven't been abused.

£50 would set off alarm bells to me.

Best regards

Mark Roberts
Laser Levels Online
 

roscoe erf

Member
Livestock Farmer
Will be laying a stone base for a new shed soon, rather than hire a laser level thought I might buy one, loads on ebay for £50.
Any good? Any recommendations? Thanks.
nothing wrong with a cheap laser level

index.php
 

Will you help clear snow?

  • yes

    Votes: 68 32.1%
  • no

    Votes: 144 67.9%

The London Palladium event “BPR Seminar”

  • 9,494
  • 123
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top