- Location
- Sheffield
Anyone have a loader for a tm150 for sale or know where there are some quicker brackets for one? Thanks
Loader for tm150
- Thread starter Farmer mk1
- Start date
- Location
- Hertfordshire
Try Gribben Tractors.
I haven’t bought anything off them but got a quote from them on a couple of loaders they had in stock.
I haven’t bought anything off them but got a quote from them on a couple of loaders they had in stock.
Kildare
Member
- Location
- Kildare, Ireland
Got this for mine a few years ago.4500euros
- Location
- Sheffield
I've had quotes of 8500 and 8950 plus fitting or fit it ourselves but they can't get on each here in time for the rest of straw. They have got the loaders just not got the brackets. What do people think to mx loaders?
Kildare
Member
- Location
- Kildare, Ireland
Mx is seen as a top end loader. I would advise useing the dealer to fit properly. Some people only plug into the rear service. There are load sencing hydrolics fitted to the tm and when properly fitted it's very easy on the tractor.
- Location
- The North
mx supposed to be good local contractor uses them
https://www.donedeal.ie/tractors-for-sale/mx-120-loader-suit-new-holland-tm/22200728
Heres an mx loader to fit couple of hundred would get it shiped to you its in northern ireland.
Theirs nothing to fitting a loader me and my brother fitted one on our tm135 last winter in a couple of evenings the only snag is youll need to get an 18mm fine thread tap and clean out all the castings they will be full of rust. Then youll need to get a shuttle valve to tee into the load sense line to get it to work properly.
Heres an mx loader to fit couple of hundred would get it shiped to you its in northern ireland.
Theirs nothing to fitting a loader me and my brother fitted one on our tm135 last winter in a couple of evenings the only snag is youll need to get an 18mm fine thread tap and clean out all the castings they will be full of rust. Then youll need to get a shuttle valve to tee into the load sense line to get it to work properly.
Last edited:
- Location
- Sheffield
How do people find loaders on the Tm range command gearbox? Ours isn't quickest at going forward to reverse and wondered if it might cause problems with the synchro etc
Mouser
Member
- Location
- near Belfast
C
Can't think of a worse gearbox for loader work to be honest.
- Location
- northampton
Are you still looking for tm loader brackets or complete loader
I'm looking???
- Location
- Sheffield
No ended up putting one on the fendt we have instead.
- Tags
- fendt loader loader bracket