Making a cooking and camping storage area in the back of my landy Take 2

[Cornish Rattler]

Hi guys
Well having a really good think we have decided to remove the MDF and re-do it all in plywood as we got thinking about screwing stuff like my metal detectors and stuff to the MDF may not stay on or come loose so have decoded to remove the MDF and re-do it in plywood boards

 

[Cornish Rattler]

Apparently son's work have a load of ply boards they want rid of so he's dropping some off today so hopefully we will get it all swapped over this weekend

 

[Cornish Rattler]

Didn't get the plyboards yet as son's work's pickup truck was on another job so will try and get them on Tuesday now

 

[Cornish Rattler]

Finally got the plyboards now so hopefully tomorrow we can start stripping the new old MDF out and fit the plyboards in

 

[Cornish Rattler]

Well thats the floor in inc re-locating the inverter slightly, on a footy break now then back on it with the headboard

 

[Cornish Rattler]

Done for the night now only got the secon'd plug socket to wire up and the switch panel to do then its onto the covering inc the inside of the roof

 

[Cornish Rattler]

Back on it tomoz will post pic's to.

 

[Cornish Rattler]

Some pic's from Saturday

 

[Cornish Rattler]

So when son arrives home from work we can get the wiring finished and the side panel back in

 

[Dan.gerous]

Ply should be much lighter, and better if it gets wet than the original MDF.

 

[Cornish Rattler]

Panel still out but all wiring done, covering will be here tomoz so son is doing that after work and whilst i'm at work so it should all be done by the time i'm home

 

[Cornish Rattler]

A couple of more pic's from yesterday

 

[Cornish Rattler]

Oops forgot this one

 

[Cornish Rattler]

The covering should have come yesterday but is now coming Thursday so once it arrives we will get it done.

 

[Cornish Rattler]

The covering should have come yesterday but is now coming Thursday so once it arrives we will get it done.

But has just arrived now

 

[Cornish Rattler]

Nearly there

 

[Cornish Rattler]

Finished the strip off in the back between the headboard and floor then moved onto lining the roof of cab and headboard then later going to make a rear door lift up table for cooking on, pic's later

 

[Cornish Rattler]

Some pic's from yesterday, please excuse next doors kid

 

[Cornish Rattler]

Some night pic's

 

[Cornish Rattler]

Son's making a dropdown worktop / table for the back door