Makita Range

Rob, I think the fact that you of all people, have purchased another brand tells me more about Milwaukee than any review I might read:)









I'm just glad you've chosen the right brand now............

The way the tools work and operate is spot on can't fault them, it's the fact they keep blowing up that's doing my tits in. Some of my tools are over 3 year old now and it's costing £100 every time to fix them, or soon adds up. Like I say it'll be a good test
 

Shovelhands

Member
Location
Sunny Essex
The way the tools work and operate is spot on can't fault them, it's the fact they keep blowing up that's doing my tits in. Some of my tools are over 3 year old now and it's costing £100 every time to fix them, or soon adds up. Like I say it'll be a good test

At £100 a time are they really worth fixing? A Makita 281 body only 1/2 wrench is sub £150 iirc, at that price they are not worth spending more than £40-50 on if a few years old and hard worked.
Makita has 3 year warranty if you register it(y)
 
At £100 a time are they really worth fixing? A Makita 281 body only 1/2 wrench is sub £150 iirc, at that price they are not worth spending more than £40-50 on if a few years old and hard worked.
Makita has 3 year warranty if you register it(y)

No that's why I haven't fixed them, new Milwaukee drill naked is £119

So does Milwaukee but most of my stuff is older than that now.
 

phillipe

Member
we have around 11 o r 12 bits of makita18v,a mix of brushless and older, the 3 ah batterys managed about 2 yrs of reasonable use,we have 4,5 and 6 ah batterys they last well.have replaced two triggers and several sets of brushes,have sent 1 battery back which was replaced,but have not sent any of the actual machines back,they are used everyday with no prisoners taken,i have a electrician who runs milwaulkee and loves the kit but sends a drill or breaker or something back for repair once a month,i know some people have never had problems they must be lucky
 

BobGreen

Member
Location
Lancs
The best Makita I have bought is a cordless mastic gun. Fantastic for jointing concrete panels.
Also have a nut runner and a impact driver. Run alongside dewalt stuff
Have found batteries run out of charge quicker than dewalt though
 

atlas

Member
Location
shropshire
Shovelhands re the 5 a batteries not fitting the old 3 a I think it is only a plastic tab that stops them sliding in i trimmed it off on one of our our tools and the bigger battery fitted then may be worth comparing .
 

Shovelhands

Member
Location
Sunny Essex
Shovelhands re the 5 a batteries not fitting the old 3 a I think it is only a plastic tab that stops them sliding in i trimmed it off on one of our our tools and the bigger battery fitted then may be worth comparing .

You may well be right(y), the later tools that take the 4ah and above batts have an extra terminal in the battery dock though, I have not investigated what this is though, but really didn't want to feck either a battery or a tool, or both, in the process of finding out if they could be shoehorned together :)

But I may be brave enough to give it a go:D

I've got no problem having a few 3ah batts about though, 3ah is plenty on a torch, radio, general drilling and screw driving unless it's really tough going.
The biggest pain is going out with a bag full of kit and batteries and realising the one item you need only takes 3ah and you've not got any with you :banghead:
But I've just about covered those tools with later type additions to the fleet now, can't have enough tools, all in the name of efficiency :whistle::whistle:
 

Shovelhands

Member
Location
Sunny Essex
The best Makita I have bought is a cordless mastic gun. Fantastic for jointing concrete panels.
Also have a nut runner and a impact driver. Run alongside dewalt stuff
Have found batteries run out of charge quicker than dewalt though

I've got one of these, absolutely great bit of kit(y), thought it was extravagant when I bought it, but couldn't be without it now! As you say, brilliant for sealing up concrete panels :)
I've just got the plastic skeleton that fits a standard tube, I know you can slide one in the 600ml ally tube, but the proper attachment makes it so much more compact, comes with a shorter rack too, not cheap but has opened it up to so many more uses(y)
 
You may well be right(y), the later tools that take the 4ah and above batts have an extra terminal in the battery dock though, I have not investigated what this is though, but really didn't want to feck either a battery or a tool, or both, in the process of finding out if they could be shoehorned together :)

But I may be brave enough to give it a go:D

I've got no problem having a few 3ah batts about though, 3ah is plenty on a torch, radio, general drilling and screw driving unless it's really tough going.
The biggest pain is going out with a bag full of kit and batteries and realising the one item you need only takes 3ah and you've not got any with you :banghead:
But I've just about covered those tools with later type additions to the fleet now, can't have enough tools, all in the name of efficiency :whistle::whistle:

With Milwaukee you don't have to worry about batteries
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 105 40.5%
  • Up to 25%

    Votes: 94 36.3%
  • 25-50%

    Votes: 39 15.1%
  • 50-75%

    Votes: 5 1.9%
  • 75-100%

    Votes: 3 1.2%
  • 100% I’ve had enough of farming!

    Votes: 13 5.0%

May Event: The most profitable farm diversification strategy 2024 - Mobile Data Centres

  • 1,738
  • 32
With just a internet connection and a plug socket you too can join over 70 farms currently earning up to £1.27 ppkw ~ 201% ROI

Register Here: https://www.eventbrite.com/e/the-mo...2024-mobile-data-centres-tickets-871045770347

Tuesday, May 21 · 10am - 2pm GMT+1

Location: Village Hotel Bury, Rochdale Road, Bury, BL9 7BQ

The Farming Forum has teamed up with the award winning hardware manufacturer Easy Compute to bring you an educational talk about how AI and blockchain technology is helping farmers to diversify their land.

Over the past 7 years, Easy Compute have been working with farmers, agricultural businesses, and renewable energy farms all across the UK to help turn leftover space into mini data centres. With...
Top