- Location
- Puranpur, India
Dear Massey Gurus, please advice. the rear PTO was woking perfectly till yesterday on a quadrant4000 baler. today its not swiching on. No error codes. any advice
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Electric nowAre you sure that its in the speed you what and not slipped in to neutral. Not driven a newer massey are they still levers for speed selection or electronic now
Check the wiring underneath the tractor going to the front axle angle sensor as I have seen the harness get pulled apart before.Thank you all . turned out the fuse F28-15amp was blown. Replaced it and it blew again. As now in the middle of the baling season do not have the time to stop work.
To engage the PTO I am using the rear fender mounted button. To stop I can use the arm control button.
fingers crossed so I can get through the season
nope. it only stops from the arm.Will it engage on the arm?
will check.Check the wiring underneath the tractor going to the front axle angle sensor as I have seen the harness get pulled apart before.
It shares the same fuse as the PTO switch