Massey Ferguson 3075

[Bluetex]

Morning all, can anyone assist with information regarding purchasing a Massey 3075, Ive had my 2wd 390T for a few years now and decided sell it on and get myself a 4wd with some comforts. I don't fully understand the dynashift gearing etc and wondered if anyone had any advise.
Anything will be help full, I've already had you should never have sold the 390T haha.
Cheers
Tony

 

[daveydiesel1]

Dyna shift is simple. 4 gears in either high or low with 4 powershift changes which gives u 32 gears. 3075 is good handy capable tractor. As long as its not really rusty and everythin works on it go for it ?

 

[Lincs Lass]

Dynashift is a clutchess on the move electro hydraulic gear change ,,for each gear chosen ,dynashift splits it four times .
There gear lever on the right is 1234 high or low range

 

[Lincs Lass]

A little thing to check that was a common fault with all MF 4wd is the coupler to the front axle,,it 6 splines that connects the drive shaft to the input shaft ,it only had a small pin through it and over time the pin breaks ,the coupler moves and the splines inside ware badly ,,you will hear it rattling

 

[masseybreaker]

best days work you have done selling the 390T the only way is up

 

[Bluetex]

Morning all, can anyone assist with information regarding purchasing a Massey 3075, Ive had my 2wd 390T for a few years now and decided sell it on and get myself a 4wd with some comforts. I don't fully understand the dynashift gearing etc and wondered if anyone had any advise.
Anything will be help full, I've already had you should never have sold the 390T haha.
Cheers
Tony

Hi, just stuck a picture up of the 3075, it a rust free tractor , been kept inside all its life, running 9000 hrs but as i say really clean, thanks again for the info.

 

[Bluetex]

A little thing to check that was a common fault with all MF 4wd is the coupler to the front axle,,it 6 splines that connects the drive shaft to the input shaft ,it only had a small pin through it and over time the pin breaks ,the coupler moves and the splines inside ware badly ,,you will hear it rattling

Thanks again, will check this now. Lots of electronics on this one compared to my 390.

 

[Lincs Lass]

Invest in a good grease gun and dont be scared to use it

 

[Henarar]

front axle pivots can get badly worn as can the pivots on the swing out hitch, look out for worn bushes on the cross shaft too

 

[Ormond]

We have a 3095.....I really like the dynashift gearbox....

 

[daveydiesel1]

Where is the pic

 

[Bluetex]

Thanks again for all the advise, much appreciated.

 

[Bluetex]

 

[Bluetex]

Where is the pic

Just added it again, messed it up the first time

 

[Wellytrack]

Get that bought.

Bin the swing out hitch, it’s pants.

Enjoy!!

 

[Lincs Lass]

That is very tidy ,,the doors normally have rust worm

 

[startinghandle]

best days work you have done selling the 390T the only way is up

What's problem with 390T?
I thought they are highly rated and if I
was looking for tractor I would be contacting bluetex

 

[Wellytrack]

Just noticed it’s got same sticker on bonnet as my 3120.

If it’s as good as that tractor had been you will have a belter.

 

[The Seeker]

Nice tractor i rember I friend was selling a jd with 3990 hrs on super tidy and I passed it up - kick myself most days

 

[Bluetex]

What's problem with 390T?
I thought they are highly rated and if I
was looking for tractor I would be contacting bluetex

The 390T was a good powerful tractor, had one problem of not going into first gear, i bought it like that and never really needed first so didn't want to fork out the cash to do a repair that wasn't going to benefit me working it, apart from that its a good low poured tractor that always been kept inside. I need the 4wd hence the change.