Massey ferguson 362

DaniCalin

Member
Arable Farmer
I have a massey ferguson 362 4wd and my axel îs broken, front right, anyone who know-how i get one secund or new
 

Attachments

  • IMG-20210423-WA0017.jpeg
    IMG-20210423-WA0017.jpeg
    273.8 KB · Views: 0
  • IMG-20210423-WA0013.jpeg
    IMG-20210423-WA0013.jpeg
    246.9 KB · Views: 0

john432

Member
Location
Carmarthenshire
What make is the axle, should be a nameplate on it. With type and serial numbers. That's the place to start, or by finding the Massey Ferguson part number.
 
Last edited:

Cowabunga

Member
Location
Ceredigion,Wales
I have a massey ferguson 362 4wd and my axel îs broken, front right, anyone who know-how i get one secund or new
Are MF short of parts for this now? They were available only a few years ago.

These are very lightly built tractors and fine for light loader work but ideally that work should be left for heavier duty, more powerful tractors in the range, like the 390, certainly for long term use.

I think, these axles are made by Dana Spicer in Italy.
 

Cowabunga

Member
Location
Ceredigion,Wales
Can you help whit a site? Or any alternativ?
For parts your best bet is through a Massey Ferguson dealer. They have all the parts on the MF web portal and can quote the latest part numbers and locate any in stock. If they can't locate a new part they may be able to source an used one. You do not have a location in your profile so don't know who your dealer would be or the nearest breaker likely to have parts.
MF 362 in good condition are worth a lot of money. Almost too much money to justify working it on a farm these days.
 
For parts your best bet is through a Massey Ferguson dealer. They have all the parts on the MF web portal and can quote the latest part numbers and locate any in stock. If they can't locate a new part they may be able to source an used one. You do not have a location in your profile so don't know who your dealer would be or the nearest breaker likely to have parts.
MF 362 in good condition are worth a lot of money. Almost too much money to justify working it on a farm these days.
For once I agree with what you say
 

MaticM.

Member
Arable Farmer
Hello I would like to ask if any one has an owners manual nad service manual for the MF 362, i would be forever grateful if someone would share the documents for my father who is a proud owner
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.9%
  • Up to 25%

    Votes: 63 34.2%
  • 25-50%

    Votes: 30 16.3%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top