Mc Hale 995 Wrappers

[IOW91]

Hi all, considering getting a wrapper that can do round and square bales.

We have started to do squares as well as rounds the last couple of years. Our old Kverneland does a good Job but is sadly only able to do rounds. We have always preferred stationary wrappers and don't want anything like a 998.

A contractor has wrapped our squares to this point, but I want to be able to bring it in house if possible.

I have seen a 995LSR working in the past, while not the quickest that wouldn't be an issue for us.

I just wanted to check a few things, as there are a few different variations of the 995. I know the LM is for small bales.

is the SE able to do round and squares? also is it just an older version of the LSR?

Are there any similar alternatives from other brands I know of the Kuhn SW1114 but have never seen one working.

Any info would be great.

Thanks.

 

[kill]

30 bales an hour MAX. Almost useless on round bales as bales sit high due to rollers being a lot nearer together than 991 round bale wrapper and any imperfections on the bale like netwrap damage and the bale will be thrown off for fun and bobbins need moving inwards for rounds each time.
Radio remote version over infrared as so much better as push the button and wrapper starts every time compared to possibly starting via infrared controller.

 

[Mark C]

How about a tanco 1514 mounted wrapper? Twin arm so much quicker than a turntable wrapper

 

[IOW91]

How about a tanco 1514 mounted wrapper? Twin arm so much quicker than a turntable wrapper

I did glance at them, how much are they either new or a decent second hand?