Merlo 32.6 oil temp

[Hjwise]

Does anyone know where the hydraulic oil temp switch is on a Merlo 32.6? Buzzer is going off but clearly not hot. I’ve just replaced one of the main hydrostatic pipes, so I assume I have knocked a wire off or something. Though it didn’t come on right away. Thanks.

 

[Planttech]

Does anyone know where the hydraulic oil temp switch is on a Merlo 32.6? Buzzer is going off but clearly not hot. I’ve just replaced one of the main hydrostatic pipes, so I assume I have knocked a wire off or something. Though it didn’t come on right away. Thanks.

The hydraulics don’t have a temperature sensor. The transmission does and it’s a brass sensor on the top of the trans pump in engine bay

 

[Hjwise]

I’ve now got a parts book and found the sensor that you mention. The wires are still on, so it will take a bit more investigation.

 

[Planttech]

I’ve now got a parts book and found the sensor that you mention. The wires are still on, so it will take a bit more investigation.

Pull the wires off and see if any different. The sensor is fairly cheap I think so easy to fit a new one