Power harrow strip down

[Bobthebuilder]

Started stripping down broken PH,

What’s left of top bearing on the rotor that fell out the other day

That was all the rollers I could find [emoji57]

So it was the whole top off and wash the trough out job [emoji849]

Will get a look tomorrow at the gears now they’re clean to see what damage there is

 

[roscoe erf]

how come there is 3 threads now 4 threads

 

[Bobthebuilder]

how come there is 3 threads now 4 threads

no idea loaded via iphone trying to delete them but can't find delete button anywhere

 

[spin cycle]

how come there is 3 threads now 4 threads

derrr ......he's got 4 power harrows to do

 

[roscoe erf]

no idea loaded via iphone trying to delete them but can't find delete button anywhere

technology is a wonderful thing

 

[roscoe erf]

derrr ......he's got 4 power harrows to do

no he is from Norfolk

 

[Phil P]

Looks like an environmentally friendly way way of disposing of the grease ???.



I hate stripping power harrows!

 

[Bobthebuilder]

derrr ......he's got 4 power harrows to do

1 is bad enough, we do actually have 4 power harrows of verying ages and sizes between the 2 farms

 

[Bobthebuilder]

Looks like an environmentally friendly way way of disposing of the grease ???.



I hate stripping power harrows!☹

it was mopped up with sawdust then washed down with detergent

 

[spin cycle]

no he is from Norfolk

if that was the case he'd have 6 power harrows....one for each finger

 

[tinman]

That a KG,
Probably is nothing to ye rich folk with yer 4 harrows..... But last time I priced the labyrinth seals for the rotors they were fairly sharp iirc, good strong Harrow tho.
Did she do much damage.

 

[Bobthebuilder]

That a KG,
Probably is nothing to ye rich folk with yer 4 harrows..... But last time I priced the labyrinth seals for the rotors they were fairly sharp iirc, good strong Harrow tho.
Did she do much damage.

na its a KE but still £230 for 1 rotor plus 2 bearings (1 in stock), 2 seals, gaskits for trough/gearbox and a barrel of oil for the bed, just to make it presentable then it's getting put back under the 19yr old drill and going on it's holidays, managed to blag a very good deal on a 2018 sulky combination to replace it, keeping the KG harrow that's under drill atm

 

[high plains drifter]

Had a bearing gone in the gearbox on my kuhn this time, one of the rollers punched a hole in the gearbox. Welded the hole up and it's holding oil again now

 

[Spencer]

Looks like an environmentally friendly way way of disposing of the grease

He’s just putting it back where it came from...

 

[Bobthebuilder]

All parts arrived today and got it back together again

 

[yellowbelly]

All parts arrived today and got it back together again

.............and no bits left over!!

Top job

 

[deleted user 837354]

Im weird but I used to like getting in there getting the top off and getting my hands on the oily bits. Just need decent tools.

 

[Bramble]

Hope you put some Loctite on the nut holding the gear on the rotor

 

[Bobthebuilder]

@Robt I take it you approve [emoji6]

Be a shame to get it mucky [emoji57]

 

[Robt]

Yes I do! You will get on well with it !