Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Why didn’t you just but 2 padlocks through the drop pins?Dog security if stopping by pub etc.
Any ID on the component parts?
Because they could still have opened the lower section…?Why didn’t you just but 2 padlocks through the drop pins?
I thought the lower sections would be lockableBecause they could still have opened the lower section…?
are there other types of adapter commercially available then ?Had to move some slurry around yesterday, in a non standard fashion. Inadequate amount of slurry pipe, so I used some redundant liquid feed pipes. What adapter did I use, I hear you ask?
Why gaffer tape of course.
Flower bed. Squeegee for digger or handler.Any bodge / creation suggestions for my old rubber digger tracks? Off of our 4.5t 360. Seems a waste not to ‘repurpose’ them!
If you have cattle or sheep seen fairly decent ring feeders made out of themAny bodge / creation suggestions for my old rubber digger tracks? Off of our 4.5t 360. Seems a waste not to ‘repurpose’ them!
The only cattle based idea I had was replacement flooring in the crush, ring feeders a good shout.If you have cattle or sheep seen fairly decent ring feeders made out of them
The squeegee/feed nudger isn’t a bad idea either but not sure I could convince Mrs SS on the flower bed idea thoughFlower bed. Squeegee for digger or handler.
That’s a forever fix that isThrottle cable on Jcb TM gave up for some reason between farms, roadside solution was required and executed by whatever was in the ash tray. Cable ties to route cable we were new and used, but electrical connecter was preloved.
They make a very good one. Have a 36 inch track from my 855 cat fir feeding wife’s horses. Make them work a bit getting the bales apart and next to no waste too.If you have cattle or sheep seen fairly decent ring feeders made out of them
my track was recycled into nice easy steel pieces on nov 5th!!!!!!!Any bodge / creation suggestions for my old rubber digger tracks? Off of our 4.5t 360. Seems a waste not to ‘repurpose’ them!
Looks great but how do you get the hay in?Made a hay rack for the nags. It was deemed the holes were far too big so I suggested getting some weld mesh but the good lady decided she could do it with string.
be lucky if that lasts more than ten years, specially with the dog still around, keep some tape handy
My dog ate my croc....I hate having cold feet in the house, so made a temporary repair. Tempted to see how long it lasts.
Easiest way is tip it on its side and then you can pull the tank out the top about a foot. Load it up and stand it back up.Looks great but how do you get the hay in?
Very tidy. Is she available for fencing repairs?Made a hay rack for the nags. It was deemed the holes were far too big so I suggested getting some weld mesh but the good lady decided she could do it with string.