Nearly
Member
- Location
- North of York
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Get that tractor washed at once shame on you !!! that front box is filthy!!
And another....
Rear towbar for our 6 ton trailer. Lights and brakes all the way through.
Can tow all sorts with it......
That looks a tidy job. Any pictures of the hydraulic brakes you've fitted on the sledge?
You didn't future proof it then, by fitting air instead?
More for taking extra trailer to outlieing land 12miles away.
Must admit didn't weld it myself. Had a new uprated axle put on trailer, thought kill 2 birds with 1stone so to speak. Just finished it off.
Christ, the old man thinks having hydraulic brakes is some new fangled black magic! Air......... That's 22nd century si-fi stuff.You didn't future proof it then, by fitting air instead?
Christ, the old man thinks having hydraulic brakes is some new fangled black magic! Air......... That's 22nd century si-fi stuff.
Used a press for the first time ever today, trying to get him to use the 2nd spool lever for press release........i think you are talking about my dad there
You should try plumbing press release into trailer braking valve.just tap the pedal and press released.have used this system for yearsUsed a press for the first time ever today, trying to get him to use the 2nd spool lever for press release........
Pictures to follow later on today at work.
Think that would confuse him even more, especially since hes on the brakes on the headland all the while. Only 2 spool levers in cab so 1 for turnover as per donkeys years and now 1 for press release.You should try plumbing press release into trailer braking valve.just tap the pedal and press released.have used this system for years
Nick...
Welded on they make good loops for holding hyd hoses cabling etc any spring will doIf you're bodging a set of chain harrows take an old haybob tine and slit the rings with a 1mm disc. You now have 3 high tensile loops for joining links in the harrows.
A good spot of weld finishes the job.
And a complete 'ring' of 3 makes a holder for the 7 pin plug on the front of a trailer.Welded on they make good loops for holding hyd hoses cabling etc any spring will do