RDS Delta 34i

[cosmagedon]

Is there any way to set a 34i to run at a set pressure for say 5 seconds when I switch the booms on? I find when backing into a corner or starting on a awkward run I have to switch over to manual and bump the pressure then switch back to auto once I'm up to speed.

My previous sprayers were all pressure based and had this function.

Also whatever I set my low alarm speed to, after a few mins it always reverts back to 8kph. Very annoying when I want to go slow in a particularly awkward field and all I'm getting is low speed alarms.

 

[Campbell]

Contact RDS Topcon. They've always been helpful.

 

[PSQ]

@towns

Also whatever I set my low alarm speed to, after a few mins it always reverts back to 8kph. Very annoying when I want to go slow in a particularly awkward field and all I'm getting is low speed alarms.

It has a low speed alarm?
There must be a way to disarm it completely in the settings, as I’ve never had that alarm on a Delta34, 34i or PSI8000 in the last 25 years.

I have experienced the low pump pressure issue after reversing up to telegraph poles at tick over, and it is a PITA.

 

[cosmagedon]

Yes, if you go into the alarm options it's got a few you can set up and high speed or low speed are 2 of them. I just find it strange how it reverts back all the time.