buttercup
Member
- Location
- Sussex/Surrey
Looking at buying an inverter arc welder. Under £250 .... any
recommendations.....
recommendations.....
MIG because it's even easier to attach pigeon shyte to metal than with a stick?I got a rohr from Amazon , didn’t expect much for the money that it was but it’s been excellent and it’s not had an easy time of it . Thinking of buying their inverter mig now as I can’t stick weld to save myself
Something along them lines I’ve done quite a lot with a mig . Would rate myself average with a mig but it’s a definite poor with the stick . Will take a look at that though thanksMIG because it's even easier to attach pigeon shyte to metal than with a stick?
I've a 180 amp Kempi. Now well over a decade old. Buy a good invertor and it'll be a joy to use. Buy a cheap Chinese thing and you'll hate it for the short time it takes to burn out
Ok I’ve looked …. They are a bit pricey for a poverty stricken beef farmerSomething along them lines I’ve done quite a lot with a mig . Would rate myself average with a mig but it’s a definite poor with the stick . Will take a look at that though thanks