Someone to make a halfshaft?

[Nearly]

Hi, looking for recommendations for a company to make a new half shaft for Emme axle on Willmot Lightspray buggy.
I don't have the old bits but I do have its friend. New parts aren't available and neither name above has been able to help me.
I have a plan B (pictured below) but this is just a last try for someone to cut some splines in a lump of suitable metal.
965mm long 45mm diameter.

 

[thesilentone]

Scroll down the page: https://www.machinery.co.uk/machinery-subcontractors/services/685183/

 

[bumkin]

Hi, looking for recommendations for a company to make a new half shaft for Emme axle on Willmot Lightspray buggy.
I don't have the old bits but I do have its friend. New parts aren't available and neither name above has been able to help me.
I have a plan B (pictured below) but this is just a last try for someone to cut some splines in a lump of suitable metal.
965mm long 45mm diameter.

try Agrifit machinery ltd york they supply parts for Agri buggy they also have Melo axles and they are very helpful

 

[bkg]

Freedom engineering Hull there the boys for the job but it's sorting out what grade of steel it should be made from ? To hard it will snap first time, it's got to be flexible ring them should be able to help you out

 

[mo!]

York Transmission Supplies. Easy job for them.

 

[Abacus]

these boys are good to take to and have a Cando attitude mite be expensive though
Rakeway Ltd
telephone +44 (0)1538 750500
e-mail [email protected]
Fax +44 (0)1538 753493

 

[Netherfield]

Half the guys I was at school with went into engineering, all retired now and no-one taking their places, ten years ago I could have named 10 firms to do it, all gone now.

Home

Reliance is a world-leading precision manufacturing company, engineering solutions for customers across a diverse range of technologies

www.reliance.co.uk

Reliance precision could likely do it, but as above could be expensive.

 

[Forever Fendt]

Hi, looking for recommendations for a company to make a new half shaft for Emme axle on Willmot Lightspray buggy.
I don't have the old bits but I do have its friend. New parts aren't available and neither name above has been able to help me.
I have a plan B (pictured below) but this is just a last try for someone to cut some splines in a lump of suitable metal.
965mm long 45mm diameter.

Makes me wonder what you would do without that shed !

 

[Old apprentice]

Would it be possible to put stronger axel on. I have a clayton buggy had problem with hub found out quite a few similar found new holland tele handler put these axelservices on clayton axel 4 and ton axel new holland must be 15 ton took a few days seams to go ok.

 

[Jon-boy]

Hi, looking for recommendations for a company to make a new half shaft for Emme axle on Willmot Lightspray buggy.
I don't have the old bits but I do have its friend. New parts aren't available and neither name above has been able to help me.
I have a plan B (pictured below) but this is just a last try for someone to cut some splines in a lump of suitable metal.
965mm long 45mm diameter.

 

[Jon-boy]

Hi, looking for recommendations for a company to make a new half shaft for Emme axle on Willmot Lightspray buggy.
I don't have the old bits but I do have its friend. New parts aren't available and neither name above has been able to help me.
I have a plan B (pictured below) but this is just a last try for someone to cut some splines in a lump of suitable metal.
965mm long 45mm diameter.

Could anyone help me with sourcing brake components for one of these? I need brake shoes and cylinders, brakes keep binding at the moment.

 

[Barleymow]

Past parts Bury St Edmunds?

 

[Av Gorritt]

I was told , that the test for torsion/ flexibility of a half shaft is to clamp one end , and the other should be capable of being twisted at least 360 degrees before it fails .

 

[Mur Huwcun]

I was told , that the test for torsion/ flexibility of a half shaft is to clamp one end , and the other should be capable of being twisted at least 360 degrees before it fails .

Would need some vice let alone a strong bench to bolt said vice to……..

 

[smcapstick]

Driveline in Lancaster could do it, too.