Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Fan full open or fine seed setting?DA or DA X ?
But either one I'd just screw the depth adjusters full up and blow it onto the top. The da x you could set the following wheels as far down as possible as well but screwing the coulter bar right up should be enough
How would I go about setting a Kuhn accord DA disc coulters drill for grass seed?? Tia
DittoJust take the pipes off the coulters and cable tie them to the frame. That way you get full coverage and no coulter lines. Its worked for us many times doing it this way.
I’ve drilled grass in rows perfectly well and never had problems
Nick...
I use one with Suffolk coulters, I take the springs off for grass, never failed yetHow would I go about setting a Kuhn accord DA disc coulters drill for grass seed?? Tia
stupid question, IS black grass a problem in a crop of grass? and why?
Dont know much your drill but we just run our disc drill shallow and haven't had any issues yet. I'm not quite sure why people seem to need to not drill it in lines. Before we sowed it with a wag tail and find the drilled crops are more even and germinate faster.
No not an issue at all as long as the ley establishes evenly and doesn’t get competed out. The problem is making sure it doesn’t seed if it’s going back into combinable crops in the near futurestupid question, IS black grass a problem in a crop of grass? and why?
As long as it’s not stuck on tramlines!!! Don’t think that’s possible without power thoughAm I right in thinking that if control box isn't plugged in then it won't tramline?? ????