Pheasant Surprise
Member
- Location
- Woodbridge, Suffolk
If its wired to standard, from that pic you've gotThanks very much, I had a suspicion you were the man in the know!
That's what I was after, as I can't pull apart the plug connecting to the controller, I will at least know the corresponding colours to splice into, when I lop off the "DIN plug"
Looking into the back of it, we have a yellow wire to pin 4, green wire to pin 1, red is 2, black is the centre.
So I think it's sorted (hopefully the correct pins in the rectangle plug are connected) as you said.
1. Radar (pulsed output)
2. Wheel speed (ditto above)
4. Linkage in.out work (either 12V or 0v)
7. Ground
Its actually called an Amp CPC plug (CPC stands for circular plastic connector) officially a C16-1 type. You can get them for a few quid + pins. e.g Mouser link. The DIN 9684/ISO 11783 is the name of the standard for the signalling and interface spec.