Tool deals/ workshop consumables sticky

[Welding Supplies Direct]

• Struggling to see when trying to weld ?.
• Dont want to wreck your good glasses ?

Have a look at the SIF Lite welding helmet with the magnifying lens options ....... from 0.75 to 3.0 Diopter.

SIF LITE WELDING HELMET
PART NUMBER: SIFWH50.1
Excl. VAT: £34.16 Incl. VAT: £40.99
IN STOCK

• Shades 9-13.
• Takes magnifying lens/ cheat lens
• Sensitivity control
• Delay control
• Thick durable construction
• 1 Year Warranty
• Switching Time 0.0001 second

https://www.weldingsuppliesdirect.co.uk/welding-supplies/welding-helmets/sif-lite-helmet-mask.html

Lenses extra.

 

[Gormers]

One for everybody using a chainsaw .
came across this company via a FB advert ,,checked them out and their prices for new chains and bars is very good
http://www.northernarbsupplies.co.uk/630-rotatech-chains-bars.
Ive ordered a couple of sizes to try them out

@Lincs Lass
How have you gone on with this firm?,
Would you recommend them?

 

[Lincs Lass]

Only used the 15 inch on abit of logging ,,it performed very well ,hard to tell at the minute about wareing but happy so far ,,they seem to be promoting themselves well as I think they were at the forestry event a few weeks back

 

[Gormers]

Only used the 15 inch on abit of logging ,,it performed very well ,hard to tell at the minute about wareing but happy so far ,,they seem to be promoting themselves well as I think they were at the forestry event a few weeks back

ok...thanks

 

[Willie adie]

One for everybody using a chainsaw .
came across this company via a FB advert ,,checked them out and their prices for new chains and bars is very good
http://www.northernarbsupplies.co.uk/630-rotatech-chains-bars.
Ive ordered a couple of sizes to try them out

I use fr Jones now, as cheap as chips for Oregon all tbge firewood boys here use them

 

[Lincs Lass]

Yes ,FR jones are a good company to deal with .
I replaced a couple of bars and used Sugiharas ,expensive but jones was the only place that stocked them

 

[Bob c]

Looking to re-stock the workshop with nuts & bolts packs. Anyone any recommendations as to where I should try? Use spaldings currently but there kits don't go into bigger sizes etc.

shop 4 fasteners,,,, just buy what you need , ....will be cheaper than buying in packs

https://shop4fasteners.co.uk/

 

[Bob c]

One for everybody using a chainsaw .
came across this company via a FB advert ,,checked them out and their prices for new chains and bars is very good
http://www.northernarbsupplies.co.uk/630-rotatech-chains-bars.
I've ordered a couple of sizes to try them out

these saw chains any good ?
have you tryed them yet ?
about a 1/2 of the price where had been getting mine from

 

[Lincs Lass]

Only used them for logging but cut clean and ware well ,,they arent a small company ,there store at sheffield is big

 

[Welding Supplies Direct]

Thought I'd post this one up in case its of interest to anyone, we're doing a special at the moment on Tyrolit Cutting Discs 4 1/2", buy 100 @ £0.78 + VAT EACH and get a free 4 1/2" Makita Angle Grinder. Shipped Free with Mainland UK.

Link is here - https://www.weldingsuppliesdirect.c...ing-disc-free-4-1-2-makita-angle-grinder.html

Tom - WSD

 

[Shovelhands]

Thought I'd post this one up in case its of interest to anyone, we're doing a special at the moment on Tyrolit Cutting Discs 4 1/2", buy 100 @ £0.78 + VAT EACH and get a free 4 1/2" Makita Angle Grinder. Shipped Free with Mainland UK.

Link is here - https://www.weldingsuppliesdirect.c...ing-disc-free-4-1-2-makita-angle-grinder.html

Tom - WSD

What thickness discs are they please?

 

[Welding Supplies Direct]

What thickness discs are they please?

They are 1MM thick, aka slitting discs.

Tom - WSD

 

[Shovelhands]

They are 1MM thick, aka slitting discs.

Tom - WSD

Thanks Tom

 

[Welding Supplies Direct]

Okay, That had a better response than expected, going quickly guys. Get them while you can

 

[milkloss]

Thought I'd post this one up in case its of interest to anyone, we're doing a special at the moment on Tyrolit Cutting Discs 4 1/2", buy 100 @ £0.78 + VAT EACH and get a free 4 1/2" Makita Angle Grinder. Shipped Free with Mainland UK.

Link is here - https://www.weldingsuppliesdirect.c...ing-disc-free-4-1-2-makita-angle-grinder.html

Tom - WSD

Nice offer. What's the bbe date on the discs?

 

[Welding Supplies Direct]

Expire 10/2018

 

[milkloss]

Expire 10/2018

Even better

 

[Welding Supplies Direct]

Looking into a similar deal with flap discs too

 

[Welding Supplies Direct]

Here we are, as a result of the last one being so well received. Buy 50 Tyrolit 4 1/2" Flap Discs (Any grit) & get a free makita grinder. Works out to £1.69 + VAT per disc. These are some brilliant discs too, will last a hell of a lot longer than your typical bargain big stuff.

Link - https://www.weldingsuppliesdirect.c...ap-discs-free-4-1-2-makita-angle-grinder.html

01952 582 260 if you've got any questions

Tom - WSD

 

[scholland]

Here we are, as a result of the last one being so well received. Buy 50 Tyrolit 4 1/2" Flap Discs (Any grit) & get a free makita grinder. Works out to £1.69 + VAT per disc. These are some brilliant discs too, will last a hell of a lot longer than your typical bargain big stuff.

Link - https://www.weldingsuppliesdirect.c...ap-discs-free-4-1-2-makita-angle-grinder.html

01952 582 260 if you've got any questions

Tom - WSD

Hi Tom @Welding Supplies Direct
How much extra for carriage to me? Ze3 9jl. Id take both grinder deals together.
Thanks