Topcon x30 steering settings

[LH10]

Just wondering if anyone could post their steering settings for Topcon seem to be bouncing a few feet each side of the ab line many thanks

 

[Northern farmer]

It isn't the tractor on your avatar. Do you have the AGI-4 receiver, running on EGNOS and no gyro unit installed? Which tractor is it installed to (hydraulic steering interface, no electric steering wheel)?

I could check the settings from our screen but I'm sure they are useless because of some essential differences on the items above. Ours wanders too, about max 1 cm from the AB-line and the two top settings (on your photo) are good at a very large range.

 

[DangerRanger]

 

[Robt]

You cant just use someone elses settings..... So so so many factors affect the steering. The op is using an AES-25 on a Bateman RB17 i think. The boom yaw will affect steering.

 

[Northern farmer]

I wasn't nearly as clever as Robt on deciphering the information from the screen capture. Only paid attention to the DGPS status.

 

[LH10]

Bit of a play around going a treat now