No ideaAs Matt77 says, ez steer is quite easy to install on every machine. By the way, how much is ez steer in UK?
Yep, 2 bolts pass through some metal on the inside then the plastic, so good and firm and only 2 holes drilled in the plastic, I did need to take the steering column to bits to do though but that was simple enough, as in take the trim off.Thanks for the photo,is that clamped on to the steering column
Yep, was working excellently until couple of weeks ago, it’s got a software bug, waiting on software update.It is Case Electristeer.
I think they do supply brackets with most kits, mine did but they weren’t to my liking, I did use them as inspiration and a pattern though.Would I need a special bracket to fit it on,
I believe this is the software level I’m on at the moment, the second pic is what comes up after trying to use it for a bit, it also says it can’t find the receiver once I turn assisted steer on, and it changes to wheel speed with no read out instead of GPS speed.I will check tomorrow afternoon. What software do you run now?
Yes, 372 with radio on RTK, all running through a pro 700 screen, I had the screen updated but that hasn’t worked, I’m waiting to see if my dealer can get an update for the ecu, I hope so as I brought it from them!! The 372 works fine on my Puma tractor so I’m guessing it’s not that.Do you have 372 reciver?