Twin flat 8 hydraulic diverter.

[FG.]

Im knocking up a carriage so i can run 2 flat 8's side by side.
I want to have the grabs selectable, so I'm thinking a single electric shut off on one line of each grab (power up to stop flow) or anyone have a suggestion?
Also need to deal with electric cable and boom extension ( it's an artic telehandler, so not that long)

 

[Fivedoors]

Not sure if these are suitable but I have a vapormatic electric diverter valve as a third service on a loader they do 6 port diverters must be something suitable in the world of hydraulics!

 

[Tim G]

Several diverters on ebay

 

[FG.]

Not sure if these are suitable but I have a vapormatic electric diverter valve as a third service on a loader they do 6 port diverters must be something suitable in the world of hydraulics!

I've got a 6 port/single solenoid diverter on one of my loaders.
But I would need 6 port twin solenoid or 3 port twin solenoid.
Just thought two, 2 port single solenoid would simple/reliable.

 

[Horn&corn]

Could use a spring Loaded paddle diverter that will only operate that ram if a bale present. One way service so both release at same time. Could fill left or right first and quicker than Elec.

 

[Flat 10]

When I’ve seen them used always worked one first and then the other.