WalterScheid PTO Guard

[Neddy flanders]

Anyone happen to know which Walterscheid PTO guard fits a Kuhn Hr4003 powerharrow?

Expect its not the cheap one.

thanks anyway

 

[Dave W]

Surely any pto guard will fit?
I'd recommend a bareco. They come with enough rings to fit anything

 

[JJT]

Another vote for bareco. Had one on my kuhn powerharrow for a few years, was still as good as new when i sold it.

 

[stev]

Try les Carter he has thousands of pto guards .

 

[Dave W]

Try les Carter he has thousands of pto guards .

@Will 1594 might be able to have a look round for you. It's the right rings you will need though

 

[Will 1594]

@Will 1594 might be able to have a look round for you. It's the right rings you will need though

Just buy one from andy geust or tim smith ,by timevrun round finding right one ,new one will have new rings and fit

 

[Pistonbroke]

Does anyone sell new tubes economically or just get a bareco? Caught it with link arm on the baler

 

[Sharpy]

Get a bareco. Better tougher cheaper.

 

[Pistonbroke]

Get a bareco. Better tougher cheaper.

If it's wide angle,is it a standard bareco and then optional bit for the extra joint?

 

[Sharpy]

If it's wide angle,is it a standard bareco and then optional bit for the extra joint?

Not sure. I put one on my baler but it has the separate guard round the wide angle which was still OK so I used a standard guard.