Massey 5440
Member
- Location
- South hams, devon
No it's worn probably from baling 100 with a dodgy drive end
NoHave you got a hot axe ?
Put the roller in place then put the bearing on .
Or weld around it and it will fall offGrind it down flat to the shaft and it'll fall off.
The one on the bottom of the door is the most difficult to do, any more should be a piece of cake now
Don't think I ever done any of them bottom ones, I definitely never took reel off, but ours had wide pickupThe first 3 are the worst imo , you have to take the pickup reel off.