What is the best/worst screw type slurry separator

[wrenchy]

For 300 cows in cubicles bedded on straw / sawdust ?

 

[Bald Rick]

You still going in to milking cows then @wrenchy ? Got a longer gestation than a blue whale this or even @Bossfarmer and his prevarications

Bachymbyd’s separator works well though I can’t remember the make . Sure Giles would be happy to show you

 

[wrenchy]

You still going in to milking cows then @wrenchy ? Got a longer gestation than a blue whale this or even @Bossfarmer and his prevarications

Bachymbyd’s separator works well though I can’t remember the make . Sure Giles would be happy to show you

My heifers are in calf now and a wateing on planning permission to be granted to build shed and slurry system should get parlour in February we dug the pit out for it on Monday so all is comeing on well

 

[Bald Rick]

My heifers are in calf now and a wateing on planning permission to be granted to build shed and slurry system should get parlour in February we dug the pit out for it on Monday so all is comeing on well

Good for you ... only taken about 10 years to make your mind up.
Who’s your buyer?
Was over in your neck of the woods recently at Rotaspiral having our TMR augers renewed. Too pushed for time to call in though. Mum & Dad ok?

If you want any help, numbers to call etc, PM me or you have Matt’s number

 

[Mc115reed]

Talk too giles at midland slurry systems he’ll sort you out he knows his stuff

 

[Married 2 The Mob]

The Fan ( also available badged as Bauer ) that I have, is streets ahead of an Italian one I tried previously.

 

[cattow]

We have a Storth/EYS 600 Separator here sold by Midland Slurry if your bedding with straw it'll need chopping very short.
I've been using a Teagle 404m hammer mill chopper for bedding cubicles which is now for sale as I'm moving to mattresses.

 

[Stinker]

I have a fan. Well bult and reliable. Costs of serviceable parts will make your eyes water.

 

[wrenchy]

Good for you ... only taken about 10 years to make your mind up.
Who’s your buyer?
Was over in your neck of the woods recently at Rotaspiral having our TMR augers renewed. Too pushed for time to call in though. Mum & Dad ok?

If you want any help, numbers to call etc, PM me or you have Matt’s number

Everyone is fine thanks the reason for the delay getting into the job was mainly the estate weren’t keen but now Iv gone down the organic route they have given consent look a wile to persuade my parents but the figures did that for me in the end.

 

[wrenchy]

Talk too giles at midland slurry systems he’ll sort you out he knows his stuff

Yes he has given me a quote seams to know his stuff

 

[Mc115reed]

Yes he has given me a quote seams to know his stuff

Very helpful and nice chap all they do is install slurry separators and setups so very clued up on the job

 

[I thats it]

Second hand separator for sale Lancashire way

 

[Blue.]

Second hand separator for sale Lancashire way

What type?

Advertised where?

 

[I thats it]

What type?

Advertised where?

Spotted on faceache, I'll have a look

 

[I thats it]

What type?

Advertised where?

About as north as you can get in Lancashire if my bearings are correct

 

[Stinker]

About as north as you can get in Lancashire if my bearings are correct

That's a green bedding one. I wonder how much they want for it.

 

[J Magee]

https://www.aegltd.co.uk/products/separators/

Cri-man separator is one of the best on the market.

 

[dairyrow]

Wouldn't just putting different sized weeping walls be a better cheaper option. This will cost a hell of alot in repairs and running it? How would you put your slurry pit liners on low level ground next to a river? Raise the soil bund up or would it have to be a solid tank? J magee

 

[Blue.]

Wouldn't just putting different sized weeping walls be a better cheaper option. This will cost a hell of alot in repairs and running it? How would you put your slurry pit liners on low level ground next to a river? Raise the soil bund up or would it have to be a solid tank? J magee

The more I read about separators the more I think a weeping wall would be a better option,it’s the running costs and hassle that puts me off,better off with another store.

Regards a low level lagoon,raise the banking so up in the air.

 

[Stinker]

The more I read about separators the more I think a weeping wall would be a better option,it’s the running costs and hassle that puts me off,better off with another store.

Regards a low level lagoon,raise the banking so up in the air.

I use my separator for making bedding so I put up with it. I agree that if the only aim is to separate liquid from solids then a weeping wall makes sense. Especially on a green site. Spend the money once and never have to touch it again has got to be the way forward. I would add that separation is well worth it though. It makes spreading so much easier