What is this?

[Ysgythan]

Been here 50 years, any ideas of what model it is/rough value? I’m 44 and can’t remember the last time it was used/attempted to be used. Plate says either I C: 2 or O C: 2. Does that make sense?

 

[Bury the Trash]

Yes, it's a bamford C2 rollermill ??


What condition are the rollers in, bit manky I would've thought...after a long time of non use.....

 

[Ysgythan]

Yes, it's a bamford C2 rollermill ??


What condition are the rollers in, bit manky I would've thought...after a long time of non use.....

I’ll assume f**ked

 

[chaffcutter]

Used one on my year before Harper in 1965, every day.

 

[Ysgythan]

Used one on my year before Harper in 1965, every day.

character building

 

[KennyO]

Is it still.wired up? Fire it up and see what happens. Slacken rollers first.

 

[An Gof]

Bamford OC2 roller mill. I must have a later version as mine is in a red colour paint. They go on for years. Only replaced mine in 18 months ago

 

[Exfarmer]

No reason it should not work fine, it may need some grooves put in the driven roller to help it feed through.
The best way to feed cereals to ruminants is rolled and it only needs just crushing, does not need to come out as pennies.

 

[chaffcutter]

The main problem was in very dry barley, it was in an old brick barn and it was gradually shaking the place apart!

Our Bentall at home was doing the same.

 

[Bury the Trash]

No reason it should not work fine, it may need some grooves put in the driven roller to help it feed through.
The best way to feed cereals to ruminants is rolled

Referring to sheep you are wrong

Without further processing ie pelleting and additions .... The Best way to feed cereals ( and peas) to sheep is whole, unles its youngest lambs and starting off creep for palatabiltiy reasons , rolling or grinding is a complete and total waste of time and money and far worse for their guts.

If you are interested I suggest doing some research on the subject.

 

[Bury the Trash]

I’ll assume fudgeed

Holding down bolts look a bit rusted , if you try him I woukdnt stand directly underneath if i was you

 

[nonemouse]

Got one similar here (but has a red paint job), sat unused and unloved if anybody wants one, complete with instruction/parts book

 

[grainboy]

I’ve got one as well, lol £50 and then you’ll have a pair, !!!

 

[Exfarmer]

Referring to sheep you are wrong

Without further processing ie pelleting and additions .... The Best way to feed cereals ( and peas) to sheep is whole, unles its youngest lambs and starting off creep for palatabiltiy reasons , rolling or grinding is a complete and total waste of time and money and far worse for their guts.

If you are interested I suggest doing some research on the subject.

I cannot argue with you, as my knowledge of sheep is derisory. Stragely they seened to prefer death to my tender ministrations

 

[Wombat]

Ours is in use everyday still

 

[Ysgythan]

Ours is in use everyday still

do you need one for parts?

 

[Hfd Cattle]

I’ve got one as well, lol £50 and then you’ll have a pair, !!!

I like the mole grips on the adjustment !

 

[Mur Huwcun]

There’s one here aswell, still with the shoot from the grain loft and half a wagtail spinner hopper at the top. It was mounted iver a wooden box that woukd hold a few days rolled barley. We used to go up as kids to shovel the grain down!!! It’s motor was transplanted onto the lister elevator for years and few years ago I found it in shed and fitted it onto a PTO site cement mixer to save having the tractor running!!!

 

[X344chap]

I still use mine every winter for feed barley. Big 4hp single phase motor.