- Location
- Northumberland
There is always some idle git playing on his phone when you want to crack on !!
You spin me right round, baby
- Thread starter Bald Rick
- Start date
- Location
- Pembrokeshire
Nice to see a very upbeat thread!!!!
What with drought and water/not water in milk
What with drought and water/not water in milk
Matt of all trades
New Member
Hi. Out of interest what mm re bar is that going round the platform?
Are your stalls jersey sized or larger?
What they call "New Zealand Standard" or 800mm in real money (width NOT length). Milfos do make a larger stall for Holsteins. It's just a matter of assessing what you have or likely to have in the future.
My HB parlour has 760mm centres,fine for your average sized cow,which the bulk of mine are,but too small for large holsteins,of which we have less and less.
Damn well hope they are 800mm centres otherwise we've fudged up the bridge
Memo to self: get tape measure out
simmy_bull
Member
- Location
- North Yorkshire
Have you measured them..........Damn well hope they are 800mm centres otherwise we've fudged up the bridge
Memo to self: get tape measure out
Not had the courage ...........
- Location
- North West
Ask them to shrink wrapped the stall work before you concrete
Done last night and all holes in the formers etc taped off. All good except the guy on the pumper who looks like a crop of nettles are growing in his arse.
Bit too warm for concrete but there you are
- Location
- Northumberland
He hasn`t posted since yesterday morning. Hope he didn`t get concreted in
He hasn`t posted since yesterday morning. Hope he didn`t get concreted in
I expect he's busy standing with a hose on it!!!
Dead Rabbits
Member
- Location
- 'Merica
Why not composite?
- Location
- Northumberland
Composite what ?
Dead Rabbits
Member
- Location
- 'Merica
I thought one of the NZ manufactures offered a composite sect rather than concrete