Cheap basic tractor choice

theboytheboy

Member
Arable Farmer
Location
Portsmouth
Had a new zetor forterra brand new in 08. Hadto go after first year. Unreal. The things that went wrong , basically everything. Only did 600 hrs with it otherwise I would probably thInk a zetor as they look decent but just no
Sound like mine was built by the same bloke! I've still got it though. Not much good to say about zetor after this one
 

Barry7529

Member
If I could take the 3pt linkage controls and swap them with the 390T for me would make it perfect. Don't like the the fact that when you get out of the cab the pto stops. Makes it pretty useless with the slurry pump on the back. Oh nearly forgot a single acting spool valve would heip too. Why all 3 have to be double acting only?
 

Flat 10

Member
Arable Farmer
Location
Fen Edge
If I could take the 3pt linkage controls and swap them with the 390T for me would make it perfect. Don't like the the fact that when you get out of the cab the pto stops. Makes it pretty useless with the slurry pump on the back. Oh nearly forgot a single acting spool valve would heip too. Why all 3 have to be double acting only?
Why do you need SA instead of DA?
 

theboytheboy

Member
Arable Farmer
Location
Portsmouth
Iv heard a few say they are not as good as they once were, shame really. Were they annoying faults or major problems with yours?
Some smaller silly things and some more serious. I knew it wasn't a top end machine but would like it to just do what is should to a reasonable standard especially as it is only lightly used.
 

daveydiesel1

Member
Livestock Farmer
Location
Co antrim
If I could take the 3pt linkage controls and swap them with the 390T for me would make it perfect. Don't like the the fact that when you get out of the cab the pto stops. Makes it pretty useless with the slurry pump on the back. Oh nearly forgot a single acting spool valve would heip too. Why all 3 have to be double acting only?
Do they not have float or else the same as the 3op as in the small screw below the coupler to change from double to single
 

Barry7529

Member
Need single acting for tipping trailers, the mower and slurry pump. No float position and no valve for changing it to single acting same as the 390/3080.
 

daveydiesel1

Member
Livestock Farmer
Location
Co antrim
Need single acting for tipping trailers, the mower and slurry pump. No float position and no valve for changing it to single acting same as the 390/3080.
Ther must be some way o changin it to single or youl burn the pump out when lettin trailers down if the oil is bein forced out to a closed coupler
 

daveydiesel1

Member
Livestock Farmer
Location
Co antrim
Need single acting for tipping trailers, the mower and slurry pump. No float position and no valve for changing it to single acting same as the 390/3080.
Ther must be some way o changin it to single or youl burn the pump out when lettin trailers down if the oil is bein forced out to a closed coupler
 

Barry7529

Member
Need single acting for tipping trailers, the mower and slurry pump. No float position and no valve for changing it to single acting same as the 390/3080.
Ther must be some way o changin it to single or youl burn the pump out when lettin trailers down if the oil is bein forced out to a closed coupler
Ther must be some way o changin it to single or youl burn the pump out when lettin trailers down if the oil is bein forced out to a closed coupler
You would think there would be. But trust me I have checked. Anyway I have one of the spool valves piped back to the transmission housing.
 

Barry7529

Member
You would think there would be. But trust me I have checked. Anyway I have one of the spool valves piped back to the transmission housing.
Anyway don't get me wrong here. I much rather spend a day in the 4709 than my 18/6 390T. Really do like that gearbox and don't really miss the splitter. Definitely a lot easier on the left leg not having to use the clutch
 

Lincsman

Member
Arable Farmer
Location
Lincolnshire
Ther must be some way o changin it to single or youl burn the pump out when lettin trailers down if the oil is bein forced out to a closed coupler

He is correct, surprised me when i borrowed one for grain carting, had to stop the tractor to drop the trailer, at the time I though 10 series Fords must have been way ahead of there time!
 
If only a double acting spool is available, it can be converted to a single acting valve by simply looping a hose from the other spool coupling to a return in the casting.
Did that a while ago duck , stops a certain person locking spool forward to let trailer down . And no where for oil to go , then goes down road with it pumping and wonders why tractor spells hot
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 114 38.6%
  • Up to 25%

    Votes: 112 38.0%
  • 25-50%

    Votes: 42 14.2%
  • 50-75%

    Votes: 6 2.0%
  • 75-100%

    Votes: 4 1.4%
  • 100% I’ve had enough of farming!

    Votes: 17 5.8%

Expanded and improved Sustainable Farming Incentive offer for farmers published

  • 121
  • 0
Expanded Sustainable Farming Incentive offer from July will give the sector a clear path forward and boost farm business resilience.

From: Department for Environment, Food & Rural Affairs and The Rt Hon Sir Mark Spencer MP Published21 May 2024

s300_Farmland_with_farmFarmland_with_farmhouse_and_grazing_cattle_in_the_UK_Farm_scene__diversification__grazing__rural__beef_GettyImages-165174232.jpg

Full details of the expanded and improved Sustainable Farming Incentive (SFI) offer available to farmers from July have been published by the...
Top