- Location
- Hertfordshire, UK
I'm after some help getting my Trimble agGPS 542 RTK transmitter to send NTRIP RTCM messages through a 4G modem to SNIP/RTK2GO so we can use this off of our John Deere 4G RTK modem to use our own current trimble mast to run our John Deere tractors.
We where using LH Agro to set this up and run it for us, but then I found out it didn't look to hard to do ourselves. I mentioned this to them and mid install they stripped it all out and left the site as they didn't like the idea of us running it ourselves... However this now means I've got to get my head around the setup myself...
I've got the 4G modem for the base station and SNIP program half setup but just trying to get my head around the Trimble setup and then getting that from the Trimble unit to the SNIP program...
Any help or contacts would be appreciated!
We where using LH Agro to set this up and run it for us, but then I found out it didn't look to hard to do ourselves. I mentioned this to them and mid install they stripped it all out and left the site as they didn't like the idea of us running it ourselves... However this now means I've got to get my head around the setup myself...
I've got the 4G modem for the base station and SNIP program half setup but just trying to get my head around the Trimble setup and then getting that from the Trimble unit to the SNIP program...
Any help or contacts would be appreciated!