NH T7 LED work lights

Genesis · Nov 3, 2023

Sorry if this has already been covered. Looking to upgrade the Halogen worklights on the T7.235 here. She's tier4a, so has the oval lights. I would prefer to keep the look as original as possible, whilst gaining a decent bit more light. Has anyone got any suggestions? Some of the lights are side mounted whilst the others are centre mounted. I see LED global do 2 relatively suitable lights, namely these:

40 Watt LED Oval Adjustable Side Mount Work Light New Holland / Massey

LG847 This 40 watt work lamp can be rotated 360 ° due to the unique mounting brackets and can therefore be mounted as you wish at any desired location. Perfect for New Hollands, Fastrac, Massey, Claas, etc. Excellent light distribution, the best quality and no chance of radio...

autosparky.ie

40 Watt LED Oval OEM Bottom Mount Work Light Massey / New Holland / Cl

LG839 Excellent light distribution, the best quality and no chance of radio interference. Comes with Plug & Wire connections GENERAL CHARACTERISTICSHousing: Powder coated aluminumApplication: Indoor as well as off-road8 pcs 5 watt high intensity CREE LEDsLamp finish: PMMABurning position...

autosparky.ie

I only noticed this evening that the later pumas have oval led lights, would these work?

Puma Tier 4B

www.caseih.com

Any advice appreciated!
Thanks!!!!

jg123 · Nov 3, 2023

90% of replys will tell you to buy utv. Google them, they will have direct replacements that look the same and double or more light

Wesley · Nov 3, 2023

To save you searching for UTV products…

Home-page

UK based manufacturers of high quality LED lights and light bars for agricultural, forestry, construction, railway, and highways vehicles.

www.ledlightsforsale.co.uk

jack_c · Nov 4, 2023

You will find the lights on the new Case pumas are middle mounted only and are unable to be side mounted. The output from them actually isn't all that high at 2400 lumens for the unit with the 6 LED chips if I remember right.

The UTV Products LED lights to suit would be the 40w 3600 lumen UTV305 or the 80w 6400 lumen UTV306.

UTV Products

UK based manufacturers of high quality LED lights and light bars for agricultural, forestry, construction, railway, and highways vehicles.

www.ledlightsforsale.ie

These would be newer technology when compared to those in your links above and look really smart on the New Holland.

Bramble · Nov 4, 2023

Just done a t7235 with utv305’s.

Got them to send some new Deutsch connectors so I could fit the new plugs straight onto the tractor wiring. Was a bit of a fiddle crimping the pins etc but neater than soldering joints or using crimp connectors

Also did a couple of NH 8340’s with the same lights, and a TM with utv315’s

cosmagedon · Nov 4, 2023

I did my T7 with oval side mount UTV's, I think mine was the first to try them I had to modify the brackets slightly. They were on 5 years before I sold the tractor and have been swapped onto another now.

Definitely upgrade the bonnet spot lights first of all, they are amazing. I wouldn't bother with the top roof spot lights unless you want it all to match. I hardly ever use them they just blind you more than anything.

Genesis · Nov 4, 2023

Thank you everyone, I'm going to order up the lights today!!! I had actually looked through the UTV website before, but I had become a little frustrated with it. Maybe it's just the phone, but I couldn't really find what I wanted.
The light from the front isn't actually too bad, but the rear is very poor, even though the halogens are like new. There is a big shadow over the end of the lift arms.

I have all the Deutsche fittings and fancy crimper here, so is the best thing to remove the wire from the back of the halogens and fit a deutsche plug?

The 8870 already had them fitted here, so I didnt have to modify the wiring.

I'll report back once I get them fitted.

Thanks again everyone!

jg123 · Nov 4, 2023

Utv lights are good but agree the website isn't the easiest. If your not sure phone them and they will know exactly what you need. I just cut the cab wires as long as possible and fitted new connectors on a puma

Genesis · Nov 4, 2023

Just ordered 8 of the UTV305s.
Thanks very much everyone for the help!

Bramble · Nov 4, 2023

Genesis said:
Thank you everyone, I'm going to order up the lights today!!! I had actually looked through the UTV website before, but I had become a little frustrated with it. Maybe it's just the phone, but I couldn't really find what I wanted.
The light from the front isn't actually too bad, but the rear is very poor, even though the halogens are like new. There is a big shadow over the end of the lift arms.

I have all the Deutsche fittings and fancy crimper here, so is the best thing to remove the wire from the back of the halogens and fit a deutsche plug?

The 8870 already had them fitted here, so I didnt have to modify the wiring.

I'll report back once I get them fitted.

Thanks again everyone!

Cut all of mine right at the back of the light, except the ones on the rear mudguard. The cable seemed really tight on those so took the lens out and cut the cable inside the fitting. If you’ve got a proper set of pliers for Deutsch connectors it should be easy to fit new plugs (UTV can supply)

Genesis · Nov 4, 2023

Thanks, I have the proper Deutsche crimper and loads of connectors so that should be handy enough. Just walking around the tractor, I noticed that the wires to the lights above the mudguards are just about long enough!!!

Genesis · Nov 7, 2023

These just arrived! It will be a little while before I get a chance to fit them, but first impressions are good. There is a nice weight to them, and they just feel better quality than the average led light in the local autofactors.

sc4545 · Nov 7, 2023

I fitted the light brackets off the Tier5 model and i think they are a better job and easier to mount spot lamps on them.

UTV Products · Nov 9, 2023

Genesis said:
These just arrived! It will be a little while before I get a chance to fit them, but first impressions are good. There is a nice weight to them, and they just feel better quality than the average led light in the local autofactors.

Thank you for your purchase.

We look forward to hearing your thoughts on them

If you have any issues don't be afraid to get in touch.

Regards

Jack
07384730914

Thomas Simpson · Nov 10, 2023

Just Got some utv lights for my valtra and so far impressed even though they were only 3200 lumen , Very quick service.

UTV Products · Nov 10, 2023

Thomas Simpson said:
Just Got some utv lights for my valtra and so far impressed even though they were only 3200 lumen , Very quick service.

Glad to hear Thomas,

If you had any pictures they would be much appreciated.

Thanks

Jack

Genesis · Nov 22, 2023

I got the lights fitted after. They look really neat and the light output is way better.

Genesis · Nov 22, 2023

Photo shows one of the led lights fitted, I'm sure I don't need to say which one it is!!!
Also got plastic boots for the Deutsch connector. It looks really neat I think.

NH T7 LED work lights

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Attachments

Member

Member

Member

Member

Member

Attachments

Member

Attachments

0 %

Up to 25%

25-50%

50-75%

75-100%

100% I’ve had enough of farming!

Share this page