axial

Hello mates, me and my father have been looking to buy a combine harvester for quite a while now. He's keen on getting something like a Claas Dominator 88 because everyone says they're a great one, but to be honest for me they're too old. I was thinking of something up to the range of 75.000€ ...

Read of two farm sales of case combines and know on was defiantly bought by a Warwickshire dealer went on there site and I quite sure they have bught both of the farm sale case combines.

I ask the above after picking a maize cob today, and I believe the crop is destined to be combine harvested with a maize header on the combine. I guess one has to have the concave wide open to get a Maize cob through it. Also I imagine the grain maize might cause one grief as regards getting it...

No road work before anybody goes woke. Is anybody stacking hestons 3 high on a bale trailer and managing to haul across fields without loosing many? We haul 2 high without straps and without any problems but I’m thinking of buying a bigger grab that will handle 3 x 4ft hestons. It’s a one man...

What level of percentage control does something like a disc get on chitted stubbles? we’ve got some grass weed fields that have greened up nicely but we won’t drill till mid October onwards so do I glyphosate now and then again pre drilling or do we disc now to kill the growth (does it though...

Has anyone been able to get a price for cereal seed yet this year?

Written by Justin Roberts from Agriland In the beginning it was all so simple, combine harvesters were basically a thresher sent out into the field with a reaper attached to either the side, or the front, to cut the crop and leave the grain neatly bagged in rows. Today, we have progressed to...

Heyho, Its looking like my old QT is going to need me to keep more parts in stock as she gets older. Can anyone suggest any suppliers overseas for bits for these old units? Specifically track hubs and axles. Im taking a wild guess that, even with shipping, I will get less of a bumming than...

Are New Holland and Case combines slipping a long way behind Claas, John Deere and Fendt/MF Ideal combines see Claas have announced new models and and new cabs on the Lexions

Hi anyone had this problem with these balers and found a cure yet baling away lovely then every few bale's goes to net knife goes throw the bale out with no net on because it's full of straw where the net falls down ontop of that spinny roller does it in hay as well and today baling oats that...

First year with a chopping baler. Are there any advantages/disadvantages to leaving the knives in for bales destined to be put through the straw blower anyway? Anyone do this, or tried it?

What model replaced the 2366 and was it the same size?

NOW LIVE – OUR BIGGEST ENTRY TO DATE! THE SOUTH WEST JULY ONLINE TIMED COLLECTIVE SALE OF 1200+ LOTS INCLUDING 100+ TRACTORS, EXCAVATORS & VEHICLES, FARM MACHINERY, LIVESTOCK & GENERAL EQUIPMENT CLOSING ON: SUNDAY 7TH AUGUST 2022 (FROM 7PM) TO INCLUDE NUMEROUS DISPERSALS FROM SOUTH...

NOW LIVE – OUR BIGGEST ENTRY TO DATE! THE SOUTH WEST JULY ONLINE TIMED COLLECTIVE SALE OF 1200+ LOTS INCLUDING 100+ TRACTORS, EXCAVATORS & VEHICLES, FARM MACHINERY, LIVESTOCK & GENERAL EQUIPMENT CLOSING ON: SUNDAY 7TH AUGUST 2022 (FROM 7PM) TO INCLUDE NUMEROUS DISPERSALS FROM SOUTH...

What do others use to try and dry big swathes of straw behind combine? Old hay bob is useless! single rotor rake might work as it will move the swath onto fresh ground. Just leave for ages and hope sun eventually dry's it

I've started a thread to see what classics you have on your farm. I've got a 1975 Ford 4600 equipped with a FIECO Deluxe Safety Cab, a New Holland 274 Hayliner Baler, a Claas CM166 Unifarm Mower, A Parmiter Rear Loader, A British Lely Hayzip Mk2 and an old Ferguson Mower all in the shed.

Written by Justin Roberts from Agriland Size matters, according to Quaile Machinery, which has the largest machine on show at the Farm Tractor Machinery Trade Association (FTMTA) Farm Machinery Show being held in the Republic of Ireland this week. The machine in question is the Dewulf Quatro...

Hi just wondered if any body had any pointers on setting for Rape , can’t get a good sample to much half pod and pod ends in the sample , I’m currently set up like this Straw accelerator in low speed Wind at 700 Rotor 700 Concave 30 Chafer 14 Sieve 5 Have I got the rotor going too fast as...

Any one know what model this was that sold today . Made £1500

If any one has fitted an extra tool box/ brackets for tool box on the combine they use I would like to know where you fitted it. All makes and ages break down so let’s get that straight .