Hi all , I was wondering if someone could give me some advice. I have a Massey 38 combine that will cut for about 10 minutes then it’ll come up on the datavision screen saying “revs too low” and the combine will drop the revs on its own then die. I’ve changed the fuel filters and I thought it...
Hello there
I’m thinking of upgrading an welger rp12 which we have had since 1986 ! It has served us well and apart from the odd fart 💨 been pretty faultless and simple. Ideally I’m after something reliable, not loaded with science fiction and easy to repair efficient .
I was thinking of a...
Hello,
I have just bought a Claas Arion 530 and now find that it is throwing fault codes. Usually 7777h which is reduction in fuel pressure. This is then often followed by one or more of these: 7781, 7782, 7786, which are all related to the EGR valve. Also 771Bh tonight which is an air intake...
Afternoon all, had a warning buzzer, lights etc come on, adblue deteriorated,drain adblue tank and put in new adblue. Have done that but warning buzzer and warning lights still on, performance is unaffected.
Very difficult to drive with the incredibly loud buzzer going off!
Is there anyway to...
Hi, due to a change in farming policy, we are looking to go from two tractors to one. It needs to have a loader and I think around the 125/130hp mark as it needs to tow a 12 tonne trailer full of chicken muck. Probably looking around 5-6 years old at the most.
I've seen a few about and I've...
So, my time on the seat will be going up this coming season, been enjoying our classic fleet the past few years, but coming to accept they are tiring to run on long days and should possibly look to go back a bit more modern. Thinking to go two to one with 7800 and 6400 against a medium frame...
Given the fact that subsidy goes straight to the bottom line(net profit) how does everyone plan to replace this? im not asking can you "survive" without it, simply how will you replace it? or will you just accept that you will make less money? given the fact the general populations minimum wage...
Currently running a JD C670 and its been a fantastic combine for us and would buy another without question if they still made them..
So I’m now torn between going for a Claas Trion 750 with similar hybrid thrashing/separation concept or a JD T670 with similar (hopefully just as reliable)...
Has anyone gone from a lexion to a Trion salesman tells me it's the same as a 750 lexion but when I asked an engineer he didn't have the same opinion.
Obviously the newer model 7500 is the replacement of a 750 but with more output but just wondering what a Trion is like.
Hi everyone. There is a radiator temperature problem in the Claas troctor. There is no problem with the ecu, the alternator conjector was replaced. The problem is not over. What might it be caused by?
THE BIGGEST SALE YET - 2000+ LOTS CLOSING SOON FROM 275+ VENDORS!
THE SOUTH WEST NOVEMBER ONLINE TIMED AUCTION OF 80+ TRACTORS & TELEHANDLERS, 60+ VEHICLES, 25+ EXCAVATORS, DIGGERS & PLANT VEHICLES, 25+ ATV’S, UTV’S & COMBINES, 325+ LOTS OF FARM MACHINERY, 85+ TRAILERS, 500+ LOTS OF LIVESTOCK &...
https://www.fwi.co.uk/livestock/what-makes-a-good-employer-on-a-dairy-farm?fbclid=IwAR1dLRcEIxDmTkQ3Xx_zZN8yib3GIg8ah_e7SiYzI1CsM9gHv0DMIhjunFU_aem_AVwtamRm_OjMyDwnI5Ai7SjJ9ht2XxSKu77yRmpzpVGwSj3bxEmwM6cf6nnYP9rg1j4
A really great write up here about keeping staff happy. Cherry picking a part I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.