Probably been discussed a million times but reviewing again to reduce overheads.
If I go down to 155 litres per ha instead of 200 I only need to visit each block of land once with my 2000 litre tank which is a big saving in time and clat factor.
Is 155 litres per ha adequate for fungicides etc...
Any suggestions for a nozzle that is good for 200l at 3 bar and 10km/hr. Currently running Teejet StreamJet 7 for 300-350l/ha but I need a different size for 200l and they are £10-14 each depending on seller.
This is a bit of a one off some I’m wanting something cheaper ideally.
Weve a 2014 spirit and having problems with the pressure. When running at say 2-3 bar when applying product, when I turn the master switch off the pressure gauge goes off the scale, even blowing pipes off. This is when applying higher rates of around 200 litres or more. All filters and seals...
Our defy nozzles are worn out. We have generally been using them at 100l/ha for spring herbicides. What other nozzles/water rates are people using for Broadway star etc or should we stick with what we know?
Also do people agree with the Syngenta blurb that 100l/ha with Defry nozzles is...
Hi all,
After your thoughts and experiences of self propelled sprayers. I feel its time for me to upgrade my sprayranger, partly because I want a bigger tank (3000l+), slightly more ground clearance (want to go hydrostatic) as we have brought osr into the rotation, and I feel like a change. Have...
100 cows on 100 acres Cutting frequently to bales or zero grazing.
Regular reseed rotation and import quite a bit of nutrients in feed.
Not used any p or k for years just urea and sulphur for first 2/3 of the season going little and often.
Gone to all umbilical/dribble bar and just put in a...
Hi, this might be an odd question because I'm an engineer, not a farmer...
How do people make sure they are spraying at the correct application rate on small sprayers (<500l like this one: https://www.silvannz.co.nz/silvan-sprayers/eco-500l-linkage-sprayer/)?
From what I've seen they just have...
We use a fair bit of Motif and X-Change with Lo-drift Hypro nozzles, but find this mix can be very slow to settle and produces a lot of fine droplets that rise up in higher temperatures. Pressure is kept down to 2 bar and it may all be down to spraying when cooler.
With drift management in mind...
Chafer quickstart front fertilizer tank.
Advert added by: Peter Noble
Machinery Details
Category: Applicators Fertiliser spreader / broadcaster Price: £3750 Condition: Good
Description
Chafer quickstart 1000 L front fertilizer tank
Teejet rate controller
How to make...
Teejet 844e sprayer controls with boom control box and wiring loom
Advert added by: Robert Gourley @Farmer73
Machinery Details
Category: Sprayers Sprayer Parts Price: £600 Condition: Good
Description
Teejet 844e sprayer control sytem off my chafer demount sprayer. Comes...
Set of 4 Teejet spray line valves of Chafer sprayer
Advert added by: Robert Gourley @Farmer73
Machinery Details
Category: Sprayers Sprayer Parts Price: £200 Condition: Used
Description
Teejet control valves of Chafer sprayer. Set of 4 off sprayer with fittings ( in...
Hello all, I'm trying to optimize our already 6 yo setup here.
We're running a JD 5100M with a M732 (year 2014) trailed sprayer controlled via the Implement Display 1100 (part no. AFH210446). We would like to get the speed taken into account to keep our application rate stable.
If someone is...
Running a bateman 26 2008 and just recently having trouble with some nozzles not spraying when I first start off but as I raise pressure or get further up the field they come on !.could this be problems with the diaphragm in the chem savers?
Any help would be appreciated
I know it might be a long shot but bought a tractor mounted weed wiper and really struggling to see where I’ve travelled. Looking for something like a teejet centreliner,, ez guide 250 or something similar. I would also consider a foam blob marker Cheers
I am having a problem where the boom holds pressure when its turned off, it runs at approx 1 bar. This is enough to open the anti drips, meaning it doesn't shut off properly on the headlands and will also open up during filling. I have changed the seals in the on/off boom section solenoids and...
Looking to fit some sort of gps section control to a sands vision sprayer. Wondering if there are any second hand units for sale, preferably either teejet matrix, Topcon, Trimble or Ag leader. Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.