5f reversible plough

[davidroberts30]

As above
Looking for something suitable for my 7480
Preferably auto reset,
Manual vari width is fine unless the plough is right price with hydraulic
Needs to have boards to take 650 tyres
Sub 4k if possible, dont mind a small project

 

[Bury the Trash]

how about an Eberhardt (spelling) on slats ? look on marketplace, machinery dealer but he's a good chap to deal with ime.

 

[Horn&corn]

I can’t find this? Could you post a link

how about an Eberhardt (spelling) on slats ? look on marketplace, machinery dealer but he's a good chap to deal with ime.

 

[Bury the Trash]

I can’t find this? Could you post a link

yes ok .

Facebook

www.facebook.com

 

[Stillfarming]

See Dowdeswell DP7R 5furrow advertised on farmers guide adverts
Genuine plough within your budget

 

[davidroberts30]

See Dowdeswell DP7R 5furrow advertised on farmers guide adverts
Genuine plough within your budget

i have never seen a dowdeswell plough body take 650 tyres

 

[quattro]

i have never seen a dowdeswell plough body take 650 tyres

What about kuhn

 

[davidroberts30]

What about kuhn

Anything considered if I can use 650 tyres

Round here there are kuhn and kvernland ploughs mainly
Few dowdeswells and ransomes
Random selection then of lemken,besson rabe ect

 

[David.]

Rabe slats are fine with 600 I can tell you, there was a v.tidy breakback one offered to me in response to a wanted on here. Too heavy for me at the time.
Think it was @Hillside ?
Wearing metal availability fine, break anything else though, and sadly I think you are on your own.

 

[Chrisw]

As above
Looking for something suitable for my 7480
Preferably auto reset,
Manual vari width is fine unless the plough is right price with hydraulic
Needs to have boards to take 650 tyres
Sub 4k if possible, dont mind a small project

Hi David,

I have an Overum 590H 5f auto reset manual variwidth that I'm thinking of selling as I just dont plough enough to justify it. Runs fine behind the TM175, I would have to check but think i'm on 580's and theres still plenty of room for more. It has the XL boards.

 

[bobk]

i have never seen a dowdeswell plough body take 650 tyres

It's something that mystifies me , you have 2 foot wide tyres going down a 15 inch furrow , is it magic ?

 

[Chrisw]

It wouldn't let me post a vid, so took a screenshot

 

[davidroberts30]

Hi David,

I have an Overum 590H 5f auto reset manual variwidth that I'm thinking of selling as I just dont plough enough to justify it. Runs fine behind the TM175, I would have to check but think i'm on 580's and theres still plenty of room for more. It has the XL boards.

i been offered a plough today see what happens
pm me a price if you like

 

[bobk]

Say what you want about Dowdeswell ploughs but they lay it it's back as opposed to rolling it over

 

[davidroberts30]

It's something that mystifies me , you have 2 foot wide tyres going down a 15 inch furrow , is it magic ?

black magic

 

[bill and bens dad]

But if you run a tape measure across the tyres you will find none of the makes measure what it says on the side of the tyre !! Granted the better makes measure nearer the size

 

[tr250]

@Two Tone has a kv for sale I believe. I’m too chicken to sell ours yet

 

[Two Tone]

@Two Tone has a kv for sale I believe. I’m too chicken to sell ours yet

Thanks for the link.
Yes I do.
I think it is an LS95 5 furrow vari-width shear bolt plough. Very good condition and 650 tractor tyres no problem.
It won’t be sub £4K though. But not that much more.

Don’t worry too much though @tr250 , I’ll be keeping my KV ES85 4 furrow plough because I also am too chicken to sell it…………just in case!

 

[davidroberts30]

But if you run a tape measure across the tyres you will find none of the makes measure what it says on the side of the tyre !! Granted the better makes measure nearer the size

The 650michys I had measured about 600
The bkt now measure about 640