Anyone into Land Rovers

[Cornish Rattler]

Hell, 90 miles in a Series, my bladder would never stand it.

Tje furthest i've done in it up to now is 300 mile round trip going to Scarborough and back metal detecting

 

[Highland Mule]

I bought my 110 near Manchester and drove 360 miles home without a stop. 6hrs and a full tank.

 

[Cornish Rattler]

I bought my 110 near Manchester and drove 360 miles home without a stop. 6hrs and a full tank.

That's good

 

[Highland Mule]

Got home with one tank empty and the other full.

 

[davieh3350]

I bought my 110 near Manchester and drove 360 miles home without a stop. 6hrs and a full tank.

Pitlochry to Dorking (it’s south of a village called London) and back.

bradford..

Wakefield 2x (was pee'd off the first time as the girlfriends car was in the shed at home and could have used it the first time...

Hexham.

West wales.

Bracley.

Newcastle.

raised the seat box at the back and fitted Saab seats slightly further in away from the window. Way more comfortable!

 

[davieh3350]

Will I miss an inter cooler if I don’t fit it?
Air temperature is always low here.

back to the 300tdi into a series project.

 

[Cornish Rattler]

Will I miss an inter cooler if I don’t fit it?
Air temperature is always low here.

back to the 300tdi into a series project.

Not sure as I have never done the conversion without the intercooler although I have fitted a slightly bigger intercooler and has made a difference so you probably would.

 

[Cornish Rattler]

Right, after running my gearing for nearly 12 months HRTC and 3.54 diffs i've decided to replace my High Ratio Transfer box case ( HRTC ) for a std tranny box as the gearing is to high, i've tried swapping back to my std diff which it did pull the gearing down but not enough so doing should sort it out.

 

[PuG]

Year before last

 

[Cornish Rattler]

Right, after running my gearing for nearly 12 months HRTC and 3.54 diffs i've decided to replace my High Ratio Transfer box case ( HRTC ) for a std tranny box as the gearing is to high, i've tried swapping back to my std diff which it did pull the gearing down but not enough so doing should sort it out.View attachment 907696View attachment 907697

I'm off in just over a week's time so I will do it then

 

[bravheart]

Any use to anyone on here

https://www.mig-welding.co.uk/forum/threads/anyone-into-tractors-and-stuff-like-that.105393/

 

[Wilksy]

Going to pick up my 110 puma from trek Overland Ltd been in for full rust treatment dinitrol protection, rear cross member refurb, and mud flaps! All ready for winter

 

[Cornish Rattler]

View attachment 909900
Going to pick up my 110 puma from trek Overland Ltd been in for full rust treatment dinitrol protection, rear cross member refurb, and mud flaps! All ready for winter

Very nice should last a few years now

 

[Wilksy]

Very nice should last a few years now

Cheers! Hope so!

 

[Cornish Rattler]

Cheers! Hope so!

Hered a lot of good things about Dinitroling landy's on other forums

 

[Cornish Rattler]

Got the g/box out today so as i'm off for a week now me and bro are going to strip the new to me tranny box to see if its ok on the bench, everything seems to work ok with no play anywhere so hopefully it should be ok if its ok we will put it all back together using new seals and gaskets then swap the tranny boxes over and get it back in

 

[Cornish Rattler]

Std tranny box swapped over to the g/box now just got a few studs to swap over as some are missing from the std tranny box and fit the tranny box sump and its ready for going back in but need to replace the clutch assy first as the clutch span whilst coming out of a tight and awkward junction on our last run out due to the gearing being so high

 

[Cornish Rattler]

A couple of pic's from after the trannyboxes were swapped over so the redundent ashcroft trannybox is the one on the floor

 

[Cornish Rattler]

A couple of pic's from after the trannyboxes were swapped over so the redundent ashcroft trannybox is the one on the floorView attachment 912305View attachment 912306

 

[Cornish Rattler]

Gearbox is back in now, hopeing to test it tomorrow