berthould sprayer to fit newholland

[warpmyster]

will a 24m mounted berthould mack sprayer fit a newholland t6? ive been told the cab is to wide and will damage everytime you fold and unfold.
is there anyone out there to prove different?

 

[Weare Cham]

Beacons will be the first to hit.
I had a hydraulic top link to rotate the sprayer backwards before folding/unfolding but that was on a alman. My mack only just fits my valtra N but only with the beacons folded away.
I didn't put the berthoud on the t6 so can't say for sure.

 

[2wheels]

can you not alter the parking rests and the hinge pivots?

 

[Lincsman]

can you not alter the parking rests and the hinge pivots?

Booms in the roadside trees then I imagine.

 

[DieselRob]

Take your beacons off and turn the boom rests the other way round assuming they haven’t already been done, only makes a small difference but just enough to clear the cab

 

[Vernon]

As above can alter the rests to make it work. Used this till we changed sprayer a couple years ago, on either T7 or a 6080. Was always quite tight, and had to be very careful when folding.

 

[2wheels]

Booms in the roadside trees then I imagine.

not if you push the hinge point on the backframe out.

 

[warpmyster]

have you any more pictures on the newholland?
and if you move the hinge points at the back wont it miss spraying in the middle?

 

[2wheels]

we managed to alter the hinge points of the landquip we had. just put a 50mm spacer between the ram end and the boom. the hinge was actually still in the same place. this allowed us to move the boom rests out a wee bit to clear the cab whilst still getting the ends of the folded booms further in away from trees etc. . the cab clearance wasn't our original problem it was the ends of the folded booms being splayed too far out and getting close to trees and the likes of double deck buses and curtainside trucks.