Is there any non genuine suppliers for bogballe parts ? I’m needing new vanes for fert spinner and I believe the parts are pricey . Mines just a 12m l1 machine
here is the cost of the 12 m genuine KRM vanes in March.
Is there any non genuine suppliers for bogballe parts ? I’m needing new vanes for fert spinner and I believe the parts are pricey . Mines just a 12m l1 machine
Did rickerby have them on the shelf ?here is the cost of the 12 m genuine KRM vanes in March.
View attachment 952425View attachment 952425
No hence they charged carriage
We had a question about swapping from 18m The KRM area sales chap and head office were really helpful.
If you Google MD agri spares, they have them on their website for €260+vatIs there any non genuine suppliers for bogballe parts ? I’m needing new vanes for fert spinner and I believe the parts are pricey . Mines just a 12m l1 machine
First thing is to take a picture of the orientation of the discs for later reference,
Then unscrew the agitator, one side is left hand thread and the other is right hand thread, then remove the disc, then remove all the 6mm bolts and pry apart the two housings you will then have the shaft removed,
One hex countersunk bolt on the bottom of this and remove the bushing, bearing, gear, bearing and seal.
Refit as above and don't forget to remove the seal from one side of each bearing, Install a grease nipple on the housing for maintenance.
delivered to you?or the stores?here is the cost of the 12 m genuine KRM vanes in March.
View attachment 952425View attachment 952425