Bomford Powertrack

[Banana Bar]

Looking for a Bomford Powertrack chisel plough. Square frame with angled legs NOT the diamond shape with straight legs. Bigger the better. Don’t think my Terrano is going to pull up beet land after this weekends rain!

 

[Will 1594]

@Bob lincs
Have you still got yours

 

[Bob lincs]

Yes and it is for sale . 3.5m with a lightweight ring press built in .

 

[deleted user 837354]

Now there is some metal that has seen a few summers for sure.

 

[Bob lincs]

We’ve had it for years , was two meters wider but we narrowed it . God knows what they pulled it with in the 70s when it was full width .

 

[deleted user 837354]

We’ve had it for years , was two meters wider but we narrowed it . God knows what they pulled it with in the 70s when it was full width .

In Wiltshire that is the sort of thing you will see parked in gateways to block them now! Often wondered how they managed to even lift the things back in the day.

 

[Will 1594]

Looking for a Bomford Powertrack chisel plough. Square frame with angled legs NOT the diamond shape with straight legs. Bigger the better. Don’t think my Terrano is going to pull up beet land after this weekends rain!

Plough it ,put some air back in it ,need to find some dry ,soil

 

[Flat 10]

Cousins make a very similar Norfolk cultivator?

 

[Lincs Lass]

God knows what they pulled it with in the 70s when it was full width .

An MF4880 or an artic john deere ,plenty of Steigar Panthers and Cougars about then

 

[Tomtrac]

An MF4880 or an artic john deere ,plenty of Steigar Panthers and Cougars about then

No probably a 150 hp tw ford or 2720 mf
They would pull the back end out off these modern 200 hp plus tractors with a stack off wheel weights in

 

[Banana Bar]

That didn’t take long. Thanks Ollie and Bob.

 

[Bob lincs]

Cousins make a very similar Norfolk cultivator?

This is ours .

 

[Hesstonbaler]

This is ours .

Afternoon Bob, is this still for sale? Regards H

 

[Bob lincs]

Hi , no we’re going to keep it now as we have sold the bomford .

 

[Will 1594]

Hi , no we’re going to keep it now as we have sold the bomford .

Bob are those legs ,same fixing as subsoiler legs ; inch thick ,?

@Hesstonbaler you could find an old level lift and swap legs ,

 

[Bob lincs]

No these are 1’1/2 I think , also a lot deeper front to back .

 

[Will 1594]

Afternoon Bob, is this still for sale? Regards H

Hesston , We made similar ,but used shakerator legs works well

 

[Captain Slack]

I think you will find the legs on the cousins are 30mm, same leg on the sumo rippa and Agriweld drag. There are two pints available 50 and 80 mm wide.

 

[Captain Slack]

In Wiltshire that is the sort of thing you will see parked in gateways to block them now! Often wondered how they managed to even lift the things back in the day.

no experience requires

 

[Laggard]

no experience requires

What pipe is that in front of the cultivar please?