They are the 7.5ton Tristor ( but really 6.5ton of nuts is about their capacity)What model do you have?
Two smaller 7.5tons bins are more expensive than a big 15tonner but if you need different feeds they are more flexible. Our supplier has a discounted rate at 8ton and over ( also 15ton also I think)They are the 7.5ton Tristor ( but really 6.5ton of nuts is about their capacity)
Two smaller 7.5tons bins are more expensive than a big 15tonner but if you need different feeds they are more flexible. Our supplier has a discounted rate at 8ton and over ( also 15ton also I think)They are the 7.5ton Tristor ( but really 6.5ton of nuts is about their capacity)
Two smaller 7.5tons bins are more expensive than a big 15tonner but if you need different feeds they are more flexible. Our supplier has a discounted rate at 8ton and over ( also 15ton also I think)They are the 7.5ton Tristor ( but really 6.5ton of nuts is about their capacity)
One of ours has an auger out of the bottom, sticks out at 45degrees for filling a diet feeder. It’s on a remote fob in the tractor so just back under and press fob, fill what you need and away you go, all in the dryWhat are the options for filling a feeder wagon from a bin, I have a 5 ton bin but it's for bagging only. It's the one thays enclosed right to the bottom. Or maybe I should try and sell it and buy a bigger one on a gantry
That would work if noone caught the auger,must take a fresh look at it tomorrow to see what side auger could go atOne of ours has an auger out of the bottom, sticks out at 45degrees for filling a diet feeder. It’s on a remote fob in the tractor so just back under and press fob, fill what you need and away you go, all in the dry
Quality Equipment make them to order. I work for QE
Will PM a PDF with pricing options Monday @JerryHow much are these? Could be ideal for what I want.
Prob 2 tonne with pipe to fill from blower wagon.
Is Hanco still going...does not advertise in the NFU mag any moreWe had a 6T Hanco bin a month ago similar price to Bildabin with delivery and bolt down.
Yes he isIs Hanco still going...does not advertise in the NFU mag any more
Must be getting on a bit now...i had one 5 years ago...dear but good serviceYes he is
Likewise aswell pleaseWill PM a PDF with pricing options Monday @Jerry
Likewise aswell please
Count me in too please. That young man from Devon will no doubt want more commission...
Will PM a PDF with pricing options Monday @Jerry