Claas Yield Mapping to Memory Card

[gmalp]

Hi,
I bought a generic CF memory card in the hope to do some yield mapping this year but the combine isn't recognising it. I'm pretty sure this is because it needs the correct structure of folders in place first. Would anybody with a working setup mind posting on here what the folder names are when you load the card onto your computer ? For example my telematics card has a batch file on it that automatically creates the correct folder structure, if there is an equivalent on the yield map cards that would be ideal.

Cheers

 

[Clive]

I don’t think you need a file structure on it but it will need to be formated correctly

fat32 iirc ?

 

[gmalp]

Thanks Clive I've just reformatted to fat32, will go and try shortly. The telematics card was in fat32 also

 

[gmalp]

Still not recognising it, I've ordered a Claas card from the dealer. A little irritating when CNH will work with a standard usb stick

 

[DanniAgro]

What size is the card? Quite a few applications have rather low limits to the size of card they can handle, sometimes say a 2Gb card is too much.

 

[gmalp]

256mb so I think should be ok. The telematics card is 128mb

 

[Clive]

Still not recognising it, I've ordered a Claas card from the dealer. A little irritating when CNH will work with a standard usb stick

class works with none class sd cards - i’ve got half a dozen and only half are claas oem the rest are sandisk

they do need to be quite big capacity if i remember correctly


i will check when i’m in the office later for you

 

[gmalp]

This one is a SanDisk too, maybe I didn't go big enough then. I can't find the specs in the manual anywhere. Did you just plug a blank card into Cebis or prep it with Agrocom etc?

 

[Clive]

here you go - i’ve got a few of these as well as the claas ones, they work fine formatted fat32

 

[gmalp]

Much appreciated