Front end post knocker for front loader

[beef 1]

Considering a front end post knocker (Browns lm2 ) for front of NewHolland.
Which one ?

 

[whindy]

Just ordered a browns four our telehandler. Did look on net at others.
Choose browns as 3 dealers nearby sell them.
Decided to buy one on safty grounds .apparently pushing posts in with loader bucket is a health and safety issue.
And when the ground is dry not very successful.

 

[Bury the Trash]

It's a good call , as you can get further from the machine , ie over ditches etc.
But Best to make sure theres legs and use them or at least a very good counterbalance as the balance of the knocker in use can be a bit at odds with the boom., twisting one side iyswim.

 

[Chae1]

@cows sh#t me to tears has a smart one on front.

 

[beef 1]

Just ordered a browns four our telehandler. Did look on net at others.
Choose browns as 3 dealers nearby sell them.
Decided to buy one on safty grounds .apparently pushing posts in with loader bucket is a health and safety issue.
And when the ground is dry not very successful.

Are you happy it can pipe it correctly , id be interested to see how its done when you get it . (Please)

 

[cows sh#t me to tears]

@cows sh#t me to tears has a smart one on front.

Bought the post driver. Made the rest.

 

[cows sh#t me to tears]

Post knocker on telehandler

It's when what your welding is too big to be tipped over and you can't weld uphill for sh1t. You weld down hand/hill the weld flows smooth and gap fills all your holes but it's not a uniform structure to you weld and all the slag/impurities are trapped out of sight in the weld (also known as a...

thefarmingforum.co.uk

 

[whindy]

Are you happy it can pipe it correctly , id be interested to see how its done when you get it . (Please)

It is going on a claas scorpion which have which have a continuous flow service on head stock so hopefully will work ok.
The scorpion has 2 services piped so will be easy to bypass machine controls and work tilt and hammer from handler hopefully will be delivered this week. Will let you know how we get on

 

[beef 1]

It is going on a claas scorpion which have which have a continuous flow service on head stock so hopefully will work ok.
The scorpion has 2 services piped so will be easy to bypass machine controls and work tilt and hammer from handler hopefully will be delivered this week. Will let you know how we get on

Ta

 

[beef 1]

Have bought this 2019 as new , but not sure sure I can pipe it on New Holland /Quickie loader so it could be to sell again ?

 

[whindy]

Same as mine .came 2 wks ago. Had problem getting it to drop hammer as scorpion has load sensing hydraulics.
Which meant the oil flow through spool on knocker was at 100% all the time so would not let oil back into circulation as no room for it. Had a tap fitted in front of spool to slow oil down so hammer will drop. Took a visit to class eastern to sort problem. We assumed the problem was a fault on scorpion.
If the scorpion had a free flow return it would have worked ok.
All good now.