Grease gun locking couplers

[Campbell]

Dairy farmers, look away now.
Looks like around £20 gets you a locking nipple coupler..... Just wondering if they work as well as suggested, and if so, which is best to get?

 

[ridger]

Dairy farmers, look away now.
Looks like around £20 gets you a locking nipple coupler..... Just wondering if they work as well as suggested, and if so, which is best to get?

No good for my loader, they won't go into the countersunk grease nipples. Too bulky for most of the grease nipples on destoner

 

[milkloss]

No, they're all w4nk unless you have a nice new machine with banks of greasers all lined up.

whenever I've had a clip on coupler I always end up going round with two grease guns on our older gear, need a good standard coupler to finish what the clip on couldn't.

 

[icanshootwell]

Most of the time they work well, PTO shafts especially, as above there are a few that are difficult to locate, Kuhn packer roller being one. Got mine from Spalding s .

 

[Jackov Altraids]

Grease Gun Ends

Can anyone recommend somewhere to buy decent grease gun ends? The Bazzoni ones that come on the speedy grease guns are very good, but have started to leak. Ordered some replacements but they sent me those G connectors, they last a week and don’t fit on half the nipples. Just want some really...

thefarmingforum.co.uk

I've been fairly pleased with the Doost.

Lock On Grease Gun Coupler-DOOST D SERIES

lock on grease gun coupler Doost D series grease coupler offers single handed release up to 10 000 psi and heavy duty hydraulic sealing.

www.jonesofnenagh.com

 

[oakleaf]

l tried a GQ which was hopeless and also have a Doost which is better but still need to revert to the standard McNaught often enough.

 

[David.]

Tried a Doost, wish I could report that it doesn't leak much.....

 

[Ashtree]

What’s a grease gun?

 

[box]

I've got one on a floppy hose and it's rubbish. Too big, too slow. Back to the hard hose with adjustable coupler that came with the gun, replaced straight grease nipples with angled ones as needed.

 

[john432]

The long version of the gurtech , works well through PTO guards.

 

[vantage]

The long version of the gurtech , works well through PTO guards.

Until the jaws leak, which they do incredibly quickly, being made of cheese.

 

[feilding]

Been using on a pair of grease guns for yrs. Not found a nipple that I can't grease yet. Would never go back to a standard end . Using g couplers.

 

[mf7480]

They're rubbish

 

[john432]

They're rubbish

Their not perfect, if the little rubber seal gets damaged then they will leak, it's allways worth keeping a set of replacement parts in stock for them

 

[daveydiesel1]

Got a g coupler about 5 months ago. Works well so far. Alot handier than havin to pump the gun against the machine or against my leg while my other hand holds the pipe

 

[neilo]

My GCoupler (on a Lube Shuttle gun) started leaking excessively last week, and I didn’t hesitate to get another one straight away. They last for years hanging in the shed.

I’ve only found a couple of nipples it wouldn’t fit on, which clearly means they don’t need greasing?
Alternatively, the old air locking ‘plunger’ type grease gun still has a normal end on, just to remind me how clean and handy the Lube Shuttle is.

 

[Chae1]

I've had a couple and had no luck with them either. Just leak grease down the sides.